My turbo build - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

My turbo build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Got the scoop on , it will do until next February. Then I’ll get the 2.5” cowl hood. Click image for larger version

Name:	BDB97090-79C8-4926-998A-4F3FAE6615DC.jpeg
Size:	3.07 MB
ID:	1578044
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • Another with it cleaned up alittle. Click image for larger version

Name:	B57EBEE2-3189-4284-A825-DA84B8713055.jpeg
Size:	2.72 MB
ID:	1578046
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • Also got my boost controller mounted and ready to go.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • Installed new front turn signals. Old ones were clouded up. Click image for larger version

Name:	A16E0004-97DE-4545-9427-C873B7F56B4C.jpeg
Size:	2.74 MB
ID:	1578061
          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

          Comment


          • Got the intake for the turbo side done. Click image for larger version

Name:	08F5BFF3-2FAA-4F69-83F1-CC19CC7B5F73.jpeg
Size:	2.14 MB
ID:	1578071 Click image for larger version

Name:	EA0E8CD3-6B2B-4984-874E-AAB6F9A71BFB.jpeg
Size:	2.86 MB
ID:	1578072
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

            Comment


            • Got the stock tranny pan on. That seal is a pain for the filter. About 3-4”s of more ground clearance. Click image for larger version

Name:	F07AFD5B-D754-4527-8BB1-CE12C85AE7E9.jpeg
Size:	2.25 MB
ID:	1578082 Going to start tuning again, only tuned for 50% throttle right now.
              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
              96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

              Comment


              • Installed a 4” alm. 90 degree pipe , I think it looks alot better. Shortened the filter 4”s . Click image for larger version

Name:	CD7FCFCC-222E-46F1-9963-34A593CDC427.jpeg
Size:	2.25 MB
ID:	1578104 Click image for larger version

Name:	F326CBC9-6953-4E45-A5E7-82865A6B3217.jpeg
Size:	2.59 MB
ID:	1578105
                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                Comment


                • Good news yesterday, got the results from my MRI on my knee, don’t need surgery. She said there’s a little fluid but should heal up on its own, already ready been over 7 months, gave me another shot before I left. Still hurts when squatting and putting any weight on it. I guess will see. Going to finish tuning the Camaro this weekend and should be done until next year when I get the hood and get the car wrapped or painted.
                  08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                  96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                  Comment


                  • Hey, great news about the knee!

                    Also, the loose ends you're tying up on the car are looking good. Nice work!

                    I'm always impressed with examples of these cars that haven't seen salt. I wish the unibody structure of mine looked like that. Lol.

                    Anyway, I'm happy to see it's all coming together!

                    Comment


                    • Thanks, yeah not too much rust on mine, 27 years in AZ, never driven in snow. Even up north where I am it doesn’t get driven in snow or rain. Only cool sunny days. Yeah on my knee, looking it up a bit, their still could be something wrong that the MRI doesn’t show, it’s been 7 months and still not getting better. Hopefully it does. How’s your car coming along?
                      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                      Comment


                      • Originally posted by ssms5411 View Post
                        Thanks, yeah not too much rust on mine, 27 years in AZ, never driven in snow. Even up north where I am it doesn’t get driven in snow or rain. Only cool sunny days. Yeah on my knee, looking it up a bit, their still could be something wrong that the MRI doesn’t show, it’s been 7 months and still not getting better. Hopefully it does. How’s your car coming along?
                        It's taken a back seat to my work on the 03 Bonneville and a few other things, but I'm hoping to get back to it soon.

                        Need to properly mask off and paint one of the re-conditioned heads I ordered from ZZP. I also have to decide if I'm porting/polishing anything before I install it. I have some old heads to practice on, so we'll see. Thanks for asking though!

                        Yeah, knee issues are tricky as hell. You can rule out the worst case but that doesn't seem to alleviate the pain or suffering. Well, I hope you feel some improvement in any case. Fingers crossed.

                        Comment


                        • Yeah, I did some P&P on mine, then when I had the bigger valves installed I had them touch them up at the machine shop, seem to be working fine. WOT-Tech did my upper/lower intakes. Seems to be running good. I would definitely paint the heads and intakes just looks better. Yeah I hope my knee gets better, kinda getting use to it after 7 months.lol
                          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                          Comment


                          • Got my boost controller set up, wanted to do some tuning but weather has been too hot. Maybe this weekend or next week. Plus we started our monsoon season so it’s been raining on and off. Just need to tune for WOT and then try out the boost controller, adding 4 psi so I’ll be at 10 psi.
                            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                            Comment


                            • Keep up the nice progress and glad the knee will be better!
                              Drivetrain Moderator - "There are no stupid questions, only stupid people!"

                              2001 Pewter Firebird Y87, M5
                              Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler

                              Go Sabres!

                              Comment


                              • Originally posted by zlexiss View Post
                                Keep up the nice progress and glad the knee will be better!
                                Thanks, just need more tuning, the hood and getting it wrapped and I’m finally done for awhile. Yeah knee is doing better, thanks
                                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                                96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                                Comment

                                Latest Topics

                                Collapse

                                There are no results that meet this criteria.

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X