Ls1 cost? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Ls1 cost?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Ls1 cost?

    Lots of older cars today are introducing LS swaps. (miata, Silvia, Rx7, Camaro)
    so the demand has definitely increased for these.. getting pretty hard to find.
    Wait, Is that a V6 or V8?
    1990 Chevrolet C-K 1500 series 4.3L .. 5spd
    1994 JDM Euno Roadster 1.8L 5spd Bolt Ons.. etc
    2000 Camaro 3.8L Auto Bolt Ons..etc

    Comment


    • #17
      Re: Ls1 cost?

      Hard to find? car-parts.com and ebay have a plethora of options.
      <a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>

      Comment


      • #18
        Re: Ls1 cost?

        Originally posted by Bird_Of_Prey View Post
        Hard to find? car-parts.com and ebay have a plethora of options.

        sorry i mean harder to find at a reasonable price in reasonable condition... but then again i guess if you look hard enough there is always a diamond in the rough.
        Wait, Is that a V6 or V8?
        1990 Chevrolet C-K 1500 series 4.3L .. 5spd
        1994 JDM Euno Roadster 1.8L 5spd Bolt Ons.. etc
        2000 Camaro 3.8L Auto Bolt Ons..etc

        Comment


        • #19
          Re: Ls1 cost?

          Most LS motors are going on average of 3k these days. You can get a solid 5.3 for around $500 bucks easily from any GM truck or SUV and could be built like an LS1. The only major difference is 20hp but I heard a lot of guys even swapping out the LS1 for the 5.3 iron block to handle more hp.

          Comment


          • #20
            Re: Ls1 cost?

            Originally posted by VF1Skullangel View Post
            Most LS motors are going on average of 3k these days. You can get a solid 5.3 for around $500 bucks easily from any GM truck or SUV and could be built like an LS1. The only major difference is 20hp but I heard a lot of guys even swapping out the LS1 for the 5.3 iron block to handle more hp.
            This is exactly why I'm swapping out my LS1 for a 5.3L. Drooling when I think of running bottom 9's with a stock bottom end. I don't think I could get there with the LS1.
            <a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>

            Comment

            Latest Topics

            Collapse

            There are no results that meet this criteria.

            FORUM SPONSORS

            Collapse
            Working...
            X