F-body Brake upgrade - C7 Rotors and ATSV Calipers - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

F-body Brake upgrade - C7 Rotors and ATSV Calipers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Brembo ats calipers on camaroFinally got them painted. Got a 20mm wheel adapter. Fits with plenty of room. The adapter is hub centric and has its own set of wheel studs. I didn’t have to cut my original studs as they fit in the groves on the rim.


    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

    Comment


    • #32
      Originally posted by transamtom1 View Post
      Looking good Mike with a good ceramic pad you can lap the car or auto cross with no fade problem.

      I have been thinking of doing 6 piston CTSV's on my Camaro when I need new brakes I think yellow would look sharp with the Silver Ice Metallic

      Duralast Front Driver Side Brake Caliper 97Y17400B (autozone.com)
      More expensive than the ATS setup but definitely better performance. I can’t wait to drop the car down and test it out… hoping to be done bu Wednesday. I am buttoning up a few last items. Got my new brake lines so swapping that stuff over. Still need to pull the AC condensor and I’d like to run my cooler fan for my trans cooler while I have it in the air.

      Then it’s off for an alignment

      2002 SOM Z28 Camaro - 12.9 @ 104 mph
      1996 3800 Camaro - 13.43 @ 100.77 mph


      Project Cars | How To Guides | Scratch Repair | Synthetic Oil

      Comment


      • #33
        Nice, can’t wait.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment

        Latest Topics

        Collapse

        There are no results that meet this criteria.

        FORUM SPONSORS

        Collapse
        Working...
        X