Cheap N20 setup - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Cheap N20 setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cheap N20 setup

    Is there any good/ cheap nitrous setups? Couple people I knew around here say I can run a 75-100 Dry shot all day no problem. Just wondering what options might be out there for a dry system.
    And if anything else should be needed?
    Last edited by insidethreat07; 09-26-2012, 12:27 AM.

  • #2
    Re: Cheap N20 setup

    Dynotune has some good kits, or go NX. Or shop around on ebay and get all what you need for a kit and piece it together.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: Cheap N20 setup

      What about something like this? Id also like to have something where I can flip a switch and activates the N20 at WOT. Then I can flip the switch and it deactivates it at WOT. Where could I get something like that
      http://www.3800performance.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ZEX-KIT&Category_Code=PA&Product_Count=2

      Comment


      • #4
        Re: Cheap N20 setup

        Looks to be a good kit, never messed with one so I don't know about it.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • #5
          Re: Cheap N20 setup

          Last time I did business with 3800 performance they screwed me outta $60 core for rockers. I refuse to even visit their site.
          Team NoVa

          2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.

          Comment


          • #6
            Re: Cheap N20 setup

            Thoughts?
            http://www.ebay.com/itm/400325605618...84.m1423.l2648
            One guy also said on another forum:
            MSD's digital window switch is a thing of beauty and a great safeguard. Tags into the tach feed for RPM, you can mount it in the console and access it thru the ashtray hole to adjust it. Dont buy the cheapo Summit brand window switch cuz its a pile of junk. Just tag the white tach feed wire under the glovebox door where its easy to get to and not only do you have a badass blinky display to impress all your friends but also perfect on-off nitrous activation. Always set it a few hundred RPM's lower than your rev limiter cuz these things use fuel cut for a limiter. Bad idea to have the NOS squeezing past the limiter. Lean=boom.
            http://www.google.com/#q=msd+digital...w=1093&bih=461
            Last edited by insidethreat07; 10-01-2012, 11:39 PM.

            Comment


            • #7
              Re: Cheap N20 setup

              Compucar bottle in a bag kit.. Think its 350.00..
              Jeff ..
              1998 Firebird.. Built 3.8 with a 125 shot.. 370rwhp,415rwtq.. stock tune!! sold

              2002 WS6 T/A.. Bolt ins..448rwhp
              2009 G8 GT.. Vararam intake, GXP axleback
              1998 Corvette.. Vararam intake, Ti axleback
              http://www.fquick.com/slow-v6

              Comment

              Latest Topics

              Collapse

              There are no results that meet this criteria.

              FORUM SPONSORS

              Collapse
              Working...
              X