Can i swap these - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Can i swap these

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can i swap these

    well long story short i needed to replace my '99 engine so i found a 98 engine, both are 3.8L. Anyways will my intake and throttle body spacer fit on the '98 engine i'm getting?

  • #2
    Re: Can i swap these

    No different setup, 98' angled TB throttle cable wire, 99 straight upper intake TB uses elecric sensors for the TB. You can swap the upper/lower intakes from your 99' to the 98 engine and you'll be fine and still use you 99' TB spacer. I think the tensioner assembly setup is different also so you'll need that off your 99' too, not sure but I think they are diffferent. I'm sure someone will post up all the differences. But you be able to use the block and heads so you'll be fine.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: Can i swap these

      well if anything as long as my intake can go on there... throttle body spacer wasnt that much but the intake ... damn man thats some serious cash i could use

      Comment


      • #4
        Re: Can i swap these

        You can swap it just need to use your upper/lower intakes, TB , from your 99'. So you can still use your TB spacer and intake from your 99', so your fine.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • #5
          Re: Can i swap these

          Originally posted by ssms5411 View Post
          You can swap it just need to use your upper/lower intakes, TB , from your 99'. So you can still use your TB spacer and intake from your 99', so your fine.
          is that hard to do and how long u think that might take for a shop to do?

          Comment


          • #6
            Re: Can i swap these

            Originally posted by bobc04 View Post
            is that hard to do and how long u think that might take for a shop to do?
            15? minutes if the engine is out of the car

            Comment

            Latest Topics

            Collapse

            There are no results that meet this criteria.

            FORUM SPONSORS

            Collapse
            Working...
            X