Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I was comming home from work, listen to some loud tunes and i see my SES light come on, not sure what the hell was wrong, i figured a sensor or tuving was off or something.. So i get home poen the hood, starting scoping around.. nothing looks bad to the eye, so i start touching stuff, and the erg valve was literally rocking side to side.. so i tightened it back up, and the SES went away by the next start.. so 20 mins later im driving to my gf's house and it comes back on!! then in 5 mins, its back off.. Now, i have driven for about 40 mins since last night, no SES yeet,, i hope this doesnt happen any moore..
I'f your EGR was loose then you would be hearing some hissing noise, because more than likely a gasket would be broken. Mine needed to tightened down. It was hissing, but the seal hadn't broken yet, it wasn't rocking either. Try checking the two bolts on the flange and see if they need to be tightened
My SES light never came on but all of a sudden my EGR came loose, it ruined my passenger side wires(they crumbled in my hand when I disconnected them)
I have npo idea why they came lose my experience is old stuff connected to the exhasut jsut gets stuck forever. You may wnat to reset your PCM. And checdk on oyur EGR, I should check on mine soon.
I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
Building the Tom Henry RS Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff. By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6. Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
02-07-2020, 10:30 PM
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment