3" Catco and I-pipe installed

[Camaro99]

Well, I believe I found part of the problem as to why it sounds bad. There is a leak where it goes into the muffler. Thanks for the imput everyone.

[Loochy88]

3 inch catco... 3 inch s pipe... 2.75 inch i pipe... flowmaster 80 series

click here to listen (and watch)

[ September 19, 2003: Message edited by: Loochy88 ]</p>

[Tyler]

once all the carbon and whatnot builds up in the pipes.. it will soudn better...

new pipes will always sound hollow and bad..

[toast]

<blockquote>quote:</font><hr>Originally posted by Loochy88:
3 inch catco... 3 inch s pipe... 2.75 inch i pipe... flowmaster 80 series

click here to listen (and watch)

[ September 19, 2003: Message edited by: Loochy88 ]<hr></blockquote>

You need some headers buddie.

;) [img]tongue.gif[/img]

[Loochy88]

<blockquote>quote:</font><hr>Originally posted by toast:


You need some headers buddie.

;) [img]tongue.gif[/img] <hr></blockquote>

yes, yes i do :D

[toast]

<blockquote>quote:</font><hr>Originally posted by Loochy88:


yes, yes i do :D <hr></blockquote>

Then your exhaust will sound perddy! Its next on my future mod list.

:D

[Loochy88]

hey, in my defense those rev's were done in idle. it sounds different under load.

[Camaro99]

Update, I discovered that there was a big hole in the weld where the pipe goes into the muffler and they couldn't get the welder in that area. So I used some JB Weld and fixed the hole. It sounds much better now.