aftermarket intake mainfold - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

aftermarket intake mainfold

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • aftermarket intake mainfold

    so i was just searching and looking for any bolt on parts for my bird and came acroos this. http://www.summitracing.com/parts/df...model/firebird

    i tried to find any one with this on their engine but no finds so far.

    any one have any experiences with it or should i just stay with the stock one?

  • #2
    Re: aftermarket intake mainfold

    That's for a fwd 3800.

    Comment


    • #3
      Re: aftermarket intake mainfold

      Originally posted by fbodyrs96 View Post
      That's for a fwd 3800.
      well i chose firebird to narrow it down and it gave me this also

      Comment


      • #4
        Re: aftermarket intake mainfold

        Originally posted by FIREBIRDV6RAGE View Post
        well i chose firebird to narrow it down and it gave me this also
        Thats only because of what size motor you put in the search. Thats a fwd 3800 and its a plastic replacement. Unless you want the intake where your radio sits. Its gonna have to be custom made.

        Comment


        • #5
          Re: aftermarket intake mainfold

          Originally posted by akirony View Post
          Thats only because of what size motor you put in the search. Thats a fwd 3800 and its a plastic replacement. Unless you want the intake where your radio sits. Its gonna have to be custom made.
          so there is no after market mainfold for our engine, i was hoping it would fit it would look cool :tup:

          Comment


          • #6
            Re: aftermarket intake mainfold

            Nope.

            Comment


            • #7
              Re: aftermarket intake mainfold

              I have that piece sitting in my garage, its from the fwd cars, the lim is different from ours as well... I don't see why you cant use it if you bolt up the lim as well. The issue is it is taller than ours and would require cutting the cowl area to make it fit. The next issue is that it doesn't flow better than ours and I believe they are prone to cracking over time because they are plastic

              2002 SOM Z28 Camaro - 12.9 @ 104 mph
              1996 3800 Camaro - 13.43 @ 100.77 mph


              Project Cars | How To Guides | Scratch Repair | Synthetic Oil

              Comment


              • #8
                Re: aftermarket intake mainfold

                Originally posted by LETZRIDE View Post
                I have that piece sitting in my garage, its from the fwd cars, the lim is different from ours as well... I don't see why you cant use it if you bolt up the lim as well. The issue is it is taller than ours and would require cutting the cowl area to make it fit. The next issue is that it doesn't flow better than ours and I believe they are prone to cracking over time because they are plastic
                then there is no point to add it it looks like it would perform better though but thanks for thhe info man

                Comment


                • #9
                  Re: aftermarket intake mainfold

                  you want a good read on aftermarket intakes for these cars, read this thread. It's gotten interesting:

                  http://www.fullthrottlev6.com/forums...manifold-setup

                  2002 SOM Z28 Camaro - 12.9 @ 104 mph
                  1996 3800 Camaro - 13.43 @ 100.77 mph


                  Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                  Comment


                  • #10
                    Re: aftermarket intake mainfold

                    Originally posted by LETZRIDE View Post
                    you want a good read on aftermarket intakes for these cars, read this thread. It's gotten interesting:

                    http://www.fullthrottlev6.com/forums...manifold-setup
                    i see and speaking of the holden upper intakes you just received one too. im starting to get intrested in that intake to the looks of it they are rare and hard to come by. i e bay searched it and only one is avalable and its in australia and looks dirty too.

                    by the way that mainfold should just take place of your lower n upper mainfolds right . but is there any proof of any big gains and if you lose fuel economy with it on our cars.

                    Comment


                    • #11
                      Re: aftermarket intake mainfold

                      Don't know if anyone has officially measured the gains on it's own. You're only finding the holden pieces in Australia because that is the only place you can get holden parts lol.

                      That's what makes those intakes so rare and hard to come by. It's also the reason not many are tested on this end.

                      2ndly, the holden intake isn't a direct swap it in and go. There are a bunch of modifications that need to be done. A few members have done it. Travis being one of them http://forum.camarov6.com/showthread...=holden&page=9

                      By design default, the holden is a better setup with longer runners and a more evenly distributed airflow to cylinders. It also makes designing a custom upper intake manifold such as this one http://holmart.com.au/online/prod1647.htm alot easier. You'll be able to custom mount something with ease to a holden as compared to our ugly/inefficient stock pieces.

                      2002 SOM Z28 Camaro - 12.9 @ 104 mph
                      1996 3800 Camaro - 13.43 @ 100.77 mph


                      Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                      Comment


                      • #12
                        Re: aftermarket intake mainfold

                        Harry Doolittle went 11.84 at 111mph in his 3.8L NHRA Bird with the stock manifold gasket matched.

                        This story shows his 12 second V6 Vert, he later changed to a HT coupe that runs 11's.

                        Nothing wrong with the stock intake manifold,you just need CAI and headers to get it to breathe.

                        http://www.mmshof.org/inductees/Doolittle_Harry.html

                        Comment


                        • #13
                          Re: aftermarket intake mainfold

                          Did he do that on the stock piece? I am almost positive Tim King used a holden manifold or a variation of...I could be wrong. Someone who knows for sure will eventually chime in. I thought I had pictures of it somewhere

                          2002 SOM Z28 Camaro - 12.9 @ 104 mph
                          1996 3800 Camaro - 13.43 @ 100.77 mph


                          Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                          Comment


                          • #14
                            Re: aftermarket intake mainfold

                            i see.....

                            Comment


                            • #15
                              Re: aftermarket intake mainfold

                              Originally posted by LETZRIDE View Post
                              Did he do that on the stock piece? I am almost positive Tim King used a holden manifold or a variation of...I could be wrong. Someone who knows for sure will eventually chime in. I thought I had pictures of it somewhere
                              Yes he did Mike,there is an engine shot in this months Drag Racer magazine.

                              PM me your snail mail addy and I will mail the mag out to you.

                              Comment

                              Latest Topics

                              Collapse

                              There are no results that meet this criteria.

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X