slp cold air intake - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

slp cold air intake

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • slp cold air intake

    My name is Xavier and I'm one of the recent noobies to join here. I wanna buy the slp cold air, mentioned in the mod encyclopedia, but apparently slp says it's for the 94-97 LT1s and are not adaptable to the 3.8. However considering it's mentioned in the mod encyclopedia and hearing of people integrating it onto their v6 I'm assuming it's possible. If I could get some reassurance that would be spankin cool! If it is possible what would I need to do to get that intake functional for my 96? I appreciate the time it took to read and hopefully comment on.

  • #2
    Re: slp cold air intake

    I have that intake on my car, been a few years since I've put it on but I don't think I had to do anything to get it to work.
    1997 Chevrolet Camaro
    L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.

    Comment


    • #3
      Re: slp cold air intake

      I have it in my car as well. Nothing special was needed to get it to work, just follow the instructions that comes with it and u'll be good to go.

      Comment


      • #4
        Re: slp cold air intake

        Swell thanks alot fellas ima get to work as quick as I can.

        Comment


        • #5
          Re: slp cold air intake

          i'm should be arriving any day now. i'm not expecting to have to do anything to it to make it fit on my '00.
          of course i'll post about it when it's all done. :)

          Comment


          • #6
            Re: slp cold air intake

            I just picked one from a junkyard for $30 - easy pull and install. SLP made the same intake pipe for several fbody engines. The 3800 version is package no 21013 and comes with the rubber elbow to connect the pipe to the intake manifold. If you get the intake for the 5.7 you wont get that elbow since they already have this stock.

            Comment


            • #7
              Re: slp cold air intake

              http://shop.zzperformance.com/store/...ttle-Body.aspx
              Does this part fit our engines? If so, is it even worth putting it on?
              Thanks

              Comment


              • #8
                Re: slp cold air intake

                Fairly certain our TB is well enough to do the job.

                Comment


                • #9
                  Re: slp cold air intake

                  Yeah , stock is enough most aftermarket won't fit ours. Their made for the Grand Prixs what not.
                  08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                  96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                  Comment


                  • #10
                    Re: slp cold air intake

                    Update: I got the elbow and the intake and will now install it today and hopefully get some pictures. Wish me luck fellas

                    Comment


                    • #11
                      Re: slp cold air intake

                      The elbow was being a PITA but I man handled it.:banana:
                      Attached Files

                      Comment


                      • #12
                        Re: slp cold air intake

                        hey xgongiveittoya44, I have a 97 3.8 and wish to install the slp intake I know intake slp-21013 is discontinued, so did you buy the slp- 21014 and an lt1 lte elbow, if so where and how much thanks

                        Comment


                        • #13
                          Re: slp cold air intake

                          Chrome intakes on ebay has some nice cold intakes.
                          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                          Comment


                          • #14
                            Re: slp cold air intake

                            thanks ssms5411, but I like the looks of the slp CAI, and was wondering if the model 21014 with the lt1 lte elbow would fit in a 3.8 Camaro. I will check out the chrome intakes on ebay, but I thought that they were held on by zip ties.

                            Comment


                            • #15
                              Re: slp cold air intake

                              Yes the SLP intake looks better I had one at some point,now its just 3" flex tubing and a K&N filter.
                              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                              96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                              Comment

                              Latest Topics

                              Collapse

                              There are no results that meet this criteria.

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X