This weekend I noticed a shining noise coming from under the hood and when I opened it up it only sounded worse... horrible. 1st thought was that my tensioner pulley bearings were shot. I couldnt locate exactly where the noise was coming from but sorta sounded below the alternator and behind the tensioner. Anyway, I noticed that I had the fan pumping heat inside and when I turned the heat down (from setting 3 to setting 1 or 2) the squeeling noise dramatically decreased. Is there a fan belt or pulley or bearings in there somewhere that I am going to need to replace or what do you think I should be looking at. what does the interior fan run off from?
Announcement
Collapse
No announcement yet.
fan noise
Collapse
X
-
lol..... when i first moved to Pitt I looked around for a local board and thats all I found..... had to register to get inside and see what it was. that was back before I knew about cv6.\'01 Mineral Grey SVT Cobra<br />-former F-body owner
Comment
-
i sorta gathered that.... thats why i racked up a total of 3 posts there. too bad because some of them have to be really skilled body guys...... or have a lot of money to pay others... with some of the work they have done on their cars.\'01 Mineral Grey SVT Cobra<br />-former F-body owner
Comment
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...2 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment