How much boost? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

How much boost?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • How much boost?

    How much boost can a stock 3.8 handle safetly. 120k miles so not really hoping for too much out of it. jw

  • #2
    Re: How much boost?

    10 PSI is safe, aslong as you have supporting mods ,like Hptuners, wideband , 255 fuel pump , and injectors.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: How much boost?

      really 10, wow thats alot more then i thought i was thinking like 5 with the mileage

      Comment


      • #4
        Re: How much boost?

        Aslong as the tune is good and air/ fuel ratio is good with no KR , you should be good with 10 PSI. Your current motor being in good condtion with no leaks. Theres people running more than 10 PSI but I would say 10 PSI is safe.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • #5
          Re: How much boost?

          My Bird is currently at Fbody Central, near Ft Meade. Shes got only 31,000. Im gunna say 12PSI be good for now. I have all those mods plus 36lbs injectors. Maybe more, suggestions?

          Comment


          • #6
            Re: How much boost?

            10+PSI aslong as you can tune it. I maxed my maf and PE at 10lbs.
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

            Comment


            • #7
              Re: How much boost?

              Agree with the 10psi..I wouldn't go over that on a stock motor if it's a dd

              Comment


              • #8
                Re: How much boost?

                my car has 175,000... I run 14psi...

                Comment


                • #9
                  Re: How much boost?

                  A lot of it depends on the turbo size. 10psi on one turbo isn't the same as 10psi on another. I still have trouble grasping this concept myself but I've heard it a lot.

                  TEAM C6V6

                  Comment


                  • #10
                    Re: How much boost?

                    Originally posted by Blizzard242 View Post
                    A lot of it depends on the turbo size. 10psi on one turbo isn't the same as 10psi on another. I still have trouble grasping this concept myself but I've heard it a lot.
                    Its because of the A/R for the turbo ,lets say a .63 A/R compared to a .68 A/R, the .63 will spool quicker than the .68 A/R but when the same PSI is reached the bigger A/R .68 will be pushing more air since its bigger but takes longer to spool thsn than the .63 A/R. Thats the way I look at it. Or it just depends on how effiecent the turbo is journal BB or ceramic BB.
                    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                    Comment


                    • #11
                      Re: How much boost?

                      Idk which i have, its the 10 psi one for a ls1 car. besides that i dont know much about it

                      Comment


                      • #12
                        Re: How much boost?

                        its the upgraded one so i am guessing a t67?

                        Comment


                        • #13
                          Re: How much boost?

                          the bigger one would be a T70, I'm using a GT35R which has really quick boost response.
                          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                          Comment


                          • #14
                            Re: How much boost?

                            I was just gna rear mount for a lil while thats why i have the sts. If i end up liking the boost ill invest into a front mount

                            Comment


                            • #15
                              Re: How much boost?

                              Let me know if you drop that rear mount... I've been looking into one for a while.

                              Comment

                              Latest Topics

                              Collapse

                              • LETZRIDE
                                New Owner!
                                by LETZRIDE
                                I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
                                5 days ago
                              • ssms5411
                                Little work today
                                by ssms5411
                                Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
                                3 weeks ago
                              • LETZRIDE
                                Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
                                by LETZRIDE


                                Building the Tom Henry RS
                                Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
                                By: Hib Halverson


                                At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
                                Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
                                02-07-2020, 10:30 PM

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X