Cam Comparison - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Cam Comparison

Collapse
X
Collapse
 
  • Page of 5
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 template Next
  • #31
    Heh...you've been terribly misled my friend.
    What it does is let you change the rev limiter, fan temps, shift firmness, at what rpm it will shift (both of those for auto of course), adjust the speedo for new tires or gears, and removes the speed limiter. It also does its power tuning for 87 or 93 octane. I think that about covers it. I have an auto and love it so far (just got it from a member of this board)...but it doesnt take care of the SES lights. I'm pretty sure the program Magnus has will take care of it once it goes on the market.
    Shawn<br />2002 Silver W68 Firebird

    Comment

    • #32
      You guys know you can get Desktop Dyno 2k from like Kazaa and bearshare right?
      I have the file that has the specs on our engine from Dominic and I think it's pretty small; I bet AZ3.8Camaro would post the file with the specs to our engine, so people could copy it and plug in your own numbers for all these different cams.
      The comparison page is a great idea, but I bet it'd make your life a little easier to put the stock engine file on the web and let people download that. Then rather than them asking you to run all these cams, they could run it themselves and maybe report back the results on this post. Just a thought, kinda like LS1.com has the actual cam review thread where you can hear about gains, specs, and pros/cons of a cam.
      AIM: Alientr8tr<br /><a href=\"http://www.cardomain.com/memberpage/583450\" target=\"_blank\">1998 Camaro 3.8L</a><br />Flowmaster 80-series, !FRA, Eibach Springs, KYB AGX, SLP sway bars, 3.42/LSD, Wings West kit, Z06 Motorsports, Silverstone Metallic paint<br /><a href=\"http://www.shift5.com/\" target=\"_blank\">Shift 5</a> - My Band

      Comment

      • #33
        I agree completely with that. If I had the program I'd run all the cams I wanted to know about without having to bother other people. Kazaa will not run on my laptop for some reason or another, so I can't get it. So...if someone wanted to send me the file that would be great :D
        Shawn<br />2002 Silver W68 Firebird

        Comment

        • #34
          what's your email or IM name? I can send it to you. The files I have were compiled by Dominic, so all credit goes to him with them. I'm sure they're very very close to AZ's, if not the same. But yeah, it's a cool program to get engine numbers off of and easy to use. I'll probably start running a bunch of cams again when summer gets closer along with a cash inflow. But give me your email addy or im name and I'll send em to you.
          AIM: Alientr8tr<br /><a href=\"http://www.cardomain.com/memberpage/583450\" target=\"_blank\">1998 Camaro 3.8L</a><br />Flowmaster 80-series, !FRA, Eibach Springs, KYB AGX, SLP sway bars, 3.42/LSD, Wings West kit, Z06 Motorsports, Silverstone Metallic paint<br /><a href=\"http://www.shift5.com/\" target=\"_blank\">Shift 5</a> - My Band

          Comment

          • #35
            Alien, I would be interested in the progam, please. jmcalister@frostburg.edu

            Thanks!
            1996 Camaro w/ Y87 package. T-Tops, purple, loaded. Custom painted salad-shooters with Mirage paint.<br /><br />(It\'s my girlfriends car!)

            Comment

            • #36
              email it to andrew.miller@blab.aorcentaf.af.mil
              www.turbov6camaro.com
              1997 3800 Series II Camaro
              4600 Stall for my ride to the mall :chug:
              7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
              11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

              Comment

              • #37
                Hey guys, I decided to just upload it to the net so everyone could get it., rather than sending out a bunch of emails. It's a zipped file that contains engine data for the 3.8 if anyone wants to run the files on Desktop Dyno
                http://filebox.vt.edu/users/jpeacott...ff/38files.zip

                [ March 15, 2004, 02:43 PM: Message edited by: AlienInv8r ]
                AIM: Alientr8tr<br /><a href=\"http://www.cardomain.com/memberpage/583450\" target=\"_blank\">1998 Camaro 3.8L</a><br />Flowmaster 80-series, !FRA, Eibach Springs, KYB AGX, SLP sway bars, 3.42/LSD, Wings West kit, Z06 Motorsports, Silverstone Metallic paint<br /><a href=\"http://www.shift5.com/\" target=\"_blank\">Shift 5</a> - My Band

                Comment

                • #38
                  mines not working?
                  www.turbov6camaro.com
                  1997 3800 Series II Camaro
                  4600 Stall for my ride to the mall :chug:
                  7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                  11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                  Comment

                  • #39
                    got it [img]smile.gif[/img]
                    www.turbov6camaro.com
                    1997 3800 Series II Camaro
                    4600 Stall for my ride to the mall :chug:
                    7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                    11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                    Comment

                    • #40
                      First of all, I don't use desktop dyno....
                      Second of all, all the specs I used are on my site.

                      Third, I am VERY SURE that Stefan and the other admin are not going to enjoy the fact that you're sharing files on their site.

                      I would take the link down. Put up a link only for the data files, not the program itself.
                      1997 Chevrolet Camaro v6 - 13.8@104MPH
                      1997 Dodge Viper GTS

                      Comment

                      • #41
                        AZ can you run the 218/218 .330/.330 113lsa 110ic .528/.528 cam just to get an idea on the capabilities.. Thanks
                        2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c

                        Comment

                        • #42
                          link is being edited as I type. I do agree that admin hasn't been too keen on program sharing in the past. the link now is just to the files related to our engine.
                          If anyone wants DD 2000, IM or email me, and I will point you in the right direction to obtain the info. I have to agree though with AZ, the site does not promote sharing actual programs, so I'll edit that out.
                          AIM: Alientr8tr<br /><a href=\"http://www.cardomain.com/memberpage/583450\" target=\"_blank\">1998 Camaro 3.8L</a><br />Flowmaster 80-series, !FRA, Eibach Springs, KYB AGX, SLP sway bars, 3.42/LSD, Wings West kit, Z06 Motorsports, Silverstone Metallic paint<br /><a href=\"http://www.shift5.com/\" target=\"_blank\">Shift 5</a> - My Band

                          Comment

                          • #43
                            Originally posted by AlienInv8r:
                            link is being edited as I type. I do agree that admin hasn't been too keen on program sharing in the past. the link now is just to the files related to our engine.
                            If anyone wants DD 2000, IM or email me, and I will point you in the right direction to obtain the info. I have to agree though with AZ, the site does not promote sharing actual programs, so I'll edit that out.
                            Good call, thanks! I will update the page for those who don't want to mess with some kind of program. I am a little busy this week, but I will get it done soon.
                            1997 Chevrolet Camaro v6 - 13.8@104MPH
                            1997 Dodge Viper GTS

                            Comment

                            • #44
                              what are you using if your not using DD2000 !!!!!!????????
                              www.turbov6camaro.com
                              1997 3800 Series II Camaro
                              4600 Stall for my ride to the mall :chug:
                              7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                              11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                              Comment

                              • #45
                                A program called Dyno2000 Engine Sim.
                                1997 Chevrolet Camaro v6 - 13.8@104MPH
                                1997 Dodge Viper GTS

                                Comment

                                Previous 1 2 3 4 5 template Next

                                Latest Topics

                                Collapse

                                There are no results that meet this criteria.

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X

                                We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                                By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                                I Agree