info on a new cam - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

info on a new cam

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • info on a new cam

    im thinking bout throwing in a cam but i know that once i do that to my car, something else will have to be upgraded in perfromance to make it work better....does anyone know where i can get a cam and what will be needed to make it work??would i need to upgrade my heads,fuel pump?
    94 3.4L A4 white t-tops<br />moroso cai<br />3\"hi-flow pacestter exhaust<br />b&m shift kit<br />catco cat<br />01 T/A rear w/ 3.73\'s and posi<br />1 pc aluminum ds<br />blacked out signals

  • #2
    guys..whoooaaaaa!!! not all at once :D
    94 3.4L A4 white t-tops<br />moroso cai<br />3\"hi-flow pacestter exhaust<br />b&m shift kit<br />catco cat<br />01 T/A rear w/ 3.73\'s and posi<br />1 pc aluminum ds<br />blacked out signals

    Comment


    • #3
      Look at it this way, the engine is going to be apart to put in a cam so you may as well get the heads done and put some nice rockers/spring/pushrods etc in it. But no it is not necessary to do that stuff.
      Hot Cammed LT1 Sleeper

      Comment


      • #4
        ok..loan me the money and ill do just that!! :D
        94 3.4L A4 white t-tops<br />moroso cai<br />3\"hi-flow pacestter exhaust<br />b&m shift kit<br />catco cat<br />01 T/A rear w/ 3.73\'s and posi<br />1 pc aluminum ds<br />blacked out signals

        Comment

        Latest Topics

        Collapse

        • Vladimir Gecko
          Low Voltage
          by Vladimir Gecko
          I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...
          3 hours ago
        • LETZRIDE
          New Owner!
          by LETZRIDE
          I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
          6 days ago
        • ssms5411
          Little work today
          by ssms5411
          Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
          3 weeks ago
        • LETZRIDE
          Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
          by LETZRIDE


          Building the Tom Henry RS
          Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
          By: Hib Halverson


          At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
          Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
          02-07-2020, 10:30 PM

        FORUM SPONSORS

        Collapse
        Working...
        X