Video after cam. and P+P heads. - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Video after cam. and P+P heads.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Video after cam. and P+P heads.

    Heres a decent video of the car idleing. Sounds good, nice and a little lope!

    http://www.youtube.com/watch?v=dKPck...ature=youtu.be

  • #2
    Re: Video after cam. and P+P heads.

    Sounds good. What cam is in it?
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: Video after cam. and P+P heads.

      The delta 260 re-grind.

      Comment


      • #4
        Re: Video after cam. and P+P heads.

        I just got done driving it for about 30 minuets.. the idle relearn is complete and it runs great.. I did notice a slight loss in power at low rpms(2k and under) but a major difference in higher RPMs. It actually doesnt fall on its face when in high 2nd gear. At the race track i was always inticipating the shift into third because it was so slow at high rpms before it shifts. Now i wont have to inticipate it so much. Next spring ill be at the track and see if can go any faster in the 1/4 then i did this year, which im sure i will. Last time i raced it i was going 16.79 and a 16.84 in the 1/4 and it was a nice night(air density). So im praying that ill get a 16.5 out of her come spring at least. Thats 305 Rs terrirory!!

        Comment


        • #5
          Re: Video after cam. and P+P heads.

          http://www.youtube.com/watch?v=Q_InxnQ6bPg

          A little better video.

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X