Double din for my 1996 Camaro - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Double din for my 1996 Camaro

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    On hold, doing repairs on the house maybe next week.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #32
      Got stuck on doing other stuff on the Camaro. Trying to get the passenger seat out to rerun the exhaust cutout harness , can’t seem to get to the back nuts. Might just let the shop do it when they straighten the TQ arm.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • #33
        Cousin came up helped me get the passenger seat out, damm back nuts with aftermarket Corbuea seats was a pain. Depending on how hot this week is hopefully get to the cutout harness and get it rerouted, then I’ll get to the double din.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • #34
          Nice! Sometimes moving the seats forward and backwards can help give you a little better access to those nuts!

          2002 SOM Z28 Camaro - 12.9 @ 104 mph
          1996 3800 Camaro - 13.43 @ 100.77 mph


          Project Cars | How To Guides | Scratch Repair | Synthetic Oil

          Comment


          • #35
            Yeah I have the Corbuea seats with Sparco seat brackets , so not stock. You can have them all the way forward and still a pain. I’ll have to get them back on after I’m finished. It’s going to be a pain. Might wait until he comes back up.lol
            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

            Comment


            • #36
              Got my wiring done and seat back in will start the double din install finally this week .
              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
              96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

              Comment


              • #37
                Post some pics, Steve.

                Comment


                • #38
                  I’ll try , always get caught up in the moment and forget to take pics. My mom has been sick all week so haven’t had time to start. Hopefully tomorrow.
                  08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                  96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                  Comment


                  • #39
                    I forget too sometimes lol!

                    2002 SOM Z28 Camaro - 12.9 @ 104 mph
                    1996 3800 Camaro - 13.43 @ 100.77 mph


                    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                    Comment


                    • #40
                      Always something coming up so I’ll just post when getting it done.
                      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                      Comment


                      • #41
                        Got the brackets on the unit, probably will have to adjust them for fit. All goes well will cut the bottom section out tomorrow and get installed so far the directions have been great.
                        Attached Files
                        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                        Comment


                        • #42
                          Looks pretty easy to do, just need to cut the bottom section off and it’s done. Lost my cutting bit for the electric hand saw so ordered some should be here in a few days. Might try a hand saw tomorrow, here’s how it looks.
                          Attached Files
                          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                          Comment


                          • #43
                            Got one side done a with a hand saw , pretty tough , my electric should cut It like butter if I had a blade. I’ll post pics of what I cutout.
                            Last edited by ssms5411; 10-06-2020, 04:38 PM.
                            08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                            96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                            Comment


                            • #44
                              Got the piece out with a dremel , just moved the center piece out of the way and got it underneath. Now ready to test fit the double din. Here’s some pics.
                              Attached Files
                              08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                              96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                              Comment


                              • #45
                                Looking good- almost there!

                                2002 SOM Z28 Camaro - 12.9 @ 104 mph
                                1996 3800 Camaro - 13.43 @ 100.77 mph


                                Project Cars | How To Guides | Scratch Repair | Synthetic Oil

                                Comment

                                Latest Topics

                                Collapse

                                There are no results that meet this criteria.

                                FORUM SPONSORS

                                Collapse
                                Working...
                                X