Tweet
On hold, doing repairs on the house maybe next week.
-
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Got stuck on doing other stuff on the Camaro. Trying to get the passenger seat out to rerun the exhaust cutout harness , can’t seem to get to the back nuts. Might just let the shop do it when they straighten the TQ arm.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Cousin came up helped me get the passenger seat out, damm back nuts with aftermarket Corbuea seats was a pain. Depending on how hot this week is hopefully get to the cutout harness and get it rerouted, then I’ll get to the double din.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Nice! Sometimes moving the seats forward and backwards can help give you a little better access to those nuts!
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Yeah I have the Corbuea seats with Sparco seat brackets , so not stock. You can have them all the way forward and still a pain. I’ll have to get them back on after I’m finished. It’s going to be a pain. Might wait until he comes back up.lol08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Got my wiring done and seat back in will start the double din install finally this week .08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Post some pics, Steve.Comment
-
I’ll try , always get caught up in the moment and forget to take pics. My mom has been sick all week so haven’t had time to start. Hopefully tomorrow.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
I forget too sometimes lol!
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Always something coming up so I’ll just post when getting it done.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Got the brackets on the unit, probably will have to adjust them for fit. All goes well will cut the bottom section out tomorrow and get installed so far the directions have been great.Attached Files08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
-
Looks pretty easy to do, just need to cut the bottom section off and it’s done. Lost my cutting bit for the electric hand saw so ordered some should be here in a few days. Might try a hand saw tomorrow, here’s how it looks.Attached Files08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
-
Got one side done a with a hand saw , pretty tough , my electric should cut It like butter if I had a blade. I’ll post pics of what I cutout.Last edited by ssms5411; 10-06-2020, 04:38 PM.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Got the piece out with a dremel , just moved the center piece out of the way and got it underneath. Now ready to test fit the double din. Here’s some pics.Attached Files08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
-
Looking good- almost there!
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
Approaching Legendary Status
-
Its been a while since I've been on the forum. Hope everyone is doing well. I still have my camaro! Unfortunately, the slave cylinder and clutch has went...2 weeks ago -
been a while but looks like i'm back in the game thanks to my brother. he went and bought an'02 bird, and since i'm a technician at the nissan place...2 weeks ago -
Well my iPhone 11 Pro Max took a dump, it’s in a boot up loop, will try and get it fixed and give it to my mom. So I got a new iPhone 15 pro max, everything...4 weeks ago
Comment