So I tightened the belt up today and then I began to run lean. So I took the car out for a scan and my injector duty was at 120% !! I'm only at 7lbs but I think it may be the tune.maybe I just need to adjust the PE tables. But has anyone maxed the gtp injectors out on7 lbs with the pd?
Announcement
Collapse
No announcement yet.
36lbs maxed??
Collapse
X
-
Re: 36lbs maxed??
Hotwire ups the voltage under WOT so the volts don't drop, I think you should be fine with your 36LB injectors and a Walbro pump since the Walbro will up your fuel pressure about 2-4 PSI. Also you said you redid your PE , so you might just need to redo your fuel tables to get the right #'s . You should be about 11.5-11.8 under WOT to be safe.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
-
Re: 36lbs maxed??
I changed the add vs rpm table. I actually went to the initial one you sent me about a year ago steve, just changed a few things. I initially change the tables frome those pretty dramatically because off the trans slip.
Comment
-
Re: 36lbs maxed??
Originally posted by Watazz View Postits a 95, with the 97 PCM thanks
That will help :tup:
Injectors:
http://www.racetronix.biz/itemdesc.a...1D030x&eq=&Tp=
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 days ago
Comment