NGK tr6's work with 3.4, right? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

NGK tr6's work with 3.4, right?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NGK tr6's work with 3.4, right?

    I saw on TiagoNOS's site and he's using the tr6's on his 94 3.4 and I was positive that they fit, but the guy at the service place said they won't.

    and how hard are the taylor wires to install. the left 3 plugs and wires look really hard to get to, thats why i took it to a place.
    1999 White Ford SVT Lightning.<br /><br />Hoping to dyno @ 450hp/550tq by the end of \'04.

  • #2
    the plugs work, i have them

    the wires are not that hard, just mark them

    the plugs are hard to get, but once you do it once, you will never forget how you did it :D

    -Steve

    Comment


    • #3
      yes they fit. its easy after u figure out how to get to the plugs the first time [img]smile.gif[/img]

      Comment


      • #4
        Nelson, your car is almost identical to mine. But yeah im ordering taylor wires and ngk sparks. I hope they run well.
        <b> \'95 Camaro 3.4L A4 <i>Rikku</i><br />AutoX - Drift - Street </b><br />\"Sideways is faster.\"

        Comment


        • #5
          Well thanks to our fellow juicing 3.4's we know ngk tr6's fit, I wasn't 100% sure.
          Gap them at 0.035
          Wires are easy.
          First time might be a pain for the plugs but once you do it once then it will be easier next time
          Race car - gone but not forgotten - 1997 firebird V6
          nitrous et & mph: 12.168 & 110.95 mph, n/a 13.746 & 96.38 mph
          2013 Dodge Challenger SRT8: 12.125, 116.45
          2010 Ford Taurus SHO: no times yet

          Comment


          • #6
            I've been running them for quite some time. I've gone from the TR6's to the NU6's. Both fit fine and both run at the lower gapping. Small gaps are always good [img]graemlins/omg.gif[/img]
            94 Quasar Blue Z28<br /><a href=\"http://www.9t4z28.com\" target=\"_blank\">http://www.9t4z28.com</a><br /><a href=\"http://www.9t4z28.com/Dyno1.htm\" target=\"_blank\">http://www.9t4z28.com/Dyno1.htm</a>

            Comment


            • #7
              If the tr-6's fit, why are is the threaded part twice as long as my stock ones???

              I went to have my plugs changed agian, and antother mechanic told me that they wont fit, and that the z28 and 3.8 ones are different from the 3.4's.

              The application guide: http://www.thunderracing.com/index.c...t&contentid=39

              What should i do, i really need new plugs and i want something that works well with nitrous????
              1999 White Ford SVT Lightning.<br /><br />Hoping to dyno @ 450hp/550tq by the end of \'04.

              Comment

              Latest Topics

              Collapse

              There are no results that meet this criteria.

              FORUM SPONSORS

              Collapse
              Working...
              X