where did everybody else using a wet kit put the micro switch at or how did you mount it pics would help, thanks.
Announcement
Collapse
No announcement yet.
Micro switch placement (Wet Kit)?
Collapse
X
-
-
Re: Micro switch placement (Wet Kit)?
mount it on the tb then so that when the tb cable is at wot it clicks it.
Comment
-
Re: Micro switch placement (Wet Kit)?
doubt it, I removed mine a couple years ago when I switch setups. There is a metal square rod on the side of the tb by the spring. I threaded it into that hole there and bent the switch bracket around into position
Comment
-
Comment
-
Re: Micro switch placement (Wet Kit)?
I mounted mine underneath the gas pedal. This way I could go to WOT without hitting the switch, but if I pushed on the pedal a bit harder, it clicked. I doubt I'll find any pics though, sold that car nearly 7 years ago.-<i>Travis</i><br /><b>99 Trans Am, Pewter, A4</b> Forged, stalled, and cammed<br /><b>85 Buick Regal WH1 T-Type</b> It\'d be cool if it ran...<br /><b>94 Camaro 3.4, Teal, M5</b> The daily beater
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...1 day ago
Comment