exhuast help! stock muffler - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

exhuast help! stock muffler

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • exhuast help! stock muffler

    Okay well heres the prob...Im gettin ready to put a new muffler on but i was removing my stock one and can't get it unbolted. The bolt on the left side hangar was no problem...but unbolting actual exhaust pipe from the muffer...different story, i just cannot get this clamp unbolted....heres a pic to show which one....any help or suggestions? thanks!!!
    Attached Files

  • #2
    Re: exhuast help! stock muffler

    do you need to save it ? if not just cut it off torch or grinder...or soak the bolt really good with some WD 40 thats what i would do

    Comment


    • #3
      Re: exhuast help! stock muffler

      Is that a Z28/have a Z28 exhaust, or am I just seeing things?

      Comment


      • #4
        Re: exhuast help! stock muffler

        Originally posted by mwood88
        Is that a Z28/have a Z28 exhaust, or am I just seeing things?
        yea, that ain't a stock '94 V6 muffler

        Comment


        • #5
          Re: exhuast help! stock muffler

          If you go and get some Torque Wrench..it helps loosen rusted bolts and such very well, it should come off a lot easier.

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X