Tweet
My Y-pipe is shot. It's been rattling for over a year. The dealership wants an arm and a leg(there's a shocker). I found some large-diameter aftermarket Y-pipes on SLPs website for the V-8, but none for the 6, I assume they're different. They're expensive, but I like the whole large-diameter idea. Does somebody make something like this for my car?
-
\'94 Camaro 3.4<br />\"No, Starvin Marvin. That\'s my pot pie.\" -
How much was the dealer askign for the y-pipe? As far as I know, nobody makes a high flow y-pipe for the V6's except for the pipe that you would get if you got headers. I can get the y-pipe from the dealer for $174 so if you are interested, let me know.- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a> -
My local dealer quoted me $350 installed. I didn't ask about the part price. It's probably pretty close to that $174. I'm not a huge header fan, so I'll probably just get that stock part. Too bad we can't get high-flow for a manifold. I wonder if an exhaust shop can handle a job like that for around that price.\'94 Camaro 3.4<br />\"No, Starvin Marvin. That\'s my pot pie.\"Comment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...3 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment