Tweet
I have my heart set in putting a flowmaster 80 series muffler on my 1995 3.4L firebird. I think it is the best muffler for me since I rarely drive in the high rpm range. Now I have heard the exhaust on 3.8's and 5.7's and boy does it sound damn good. What are your experiences with them on 3.4L v6's. I am mostly concerned with how it sounds at low rpms and below 40 mph. [img]graemlins/toto.gif[/img]
-
-
I like it. It's loud, raunchy, and a little deeper than it used to be. I've had it on for a little over a year. It only sounds high pitched at 4.5-5k rpm, which is redline... who pushes their car that hard anyways???
I ordered a Dynomax superturbo off ebay. I hope it sounds as good as the Flowmaster! I just want to tone the volume down a bit... I'm getting a little deaf, since I have to turn up my stereo a bit! :eek: I also want to hear my buddies talking to me.Massivefirebird\'s <a href=\"http://www.cardomain.com/id/leondb\" target=\"_blank\">(leonDB) Cardomain</a><br /><a href=\"http://www.flowmastermufflers.com/cgi-bin/flowmaster\" target=\"_blank\"> Flowmaster 80</a>, <a href=\"http://www.knfilters.com/\" target=\"_blank\"> K&N FIPK</a>, <a href=\"http://www.jetchip.com/\" target=\"_blank\"> Jet Stage 2 & 180º T/S</a>, <a href=\"http://www.boschusa.com/AutoParts/SparkPlugs/PlatinumPlus4/\" target=\"_blank\"> Bosch quads</a>, <a href=\"http://www.pilotautomotive.com/pilot2dn.htm\" target=\"_blank\"> Pilot 1055 Fogs</a>, <a href=\"http://makotoautotrends.com/\" target=\"_blank\">Clear turn signals</a>, <a href=\"http://www.autoventshade.com/\" target=\"_blank\">AVS rear blackouts</a>... <a href=\"http://www.massiveaudio.com\" target=\"_blank\">2 Massive CW 12\'s</a>, <a href=\"http://www.kicker.com\" target=\"_blank\">Kicker 2252, 652,& 352 XI Amps</a>, <a href=\"http://www.mbquart.com/2003/en_US/home/\" target=\"_blank\">MB Quart</a>. -
Would anyone have a sound clip of it sounds on a 3.4L V6. [img]graemlins/fluffy.gif[/img]Comment
-
no sounds but if you like deep rumbly sound, go for it. it sounds great and is loud. i had it on my 3.4l camaro before i wrecked it.For Sale<p>Mods so Far:<br />Tb Coolant Bypass, NGK Vpower Plugs, Accel 8mm Wires, Gutted Cat, TransAm Muffler, K&N FIPK, Crower Baja Cam, Comp Cams Magnum Rocker Arms 1.52 Ratio, Ported Throttlebody, Ported Intake Manifold, 3.73s and Auburn LSD, Yellow Underbody Neons, Milled Heads, Pacesetter Headers, TransGo Shift Kit, 1 Piece DS, Accel Coils, Rk Sport Air Temperature Module<p>Soon Mods:<br />Nos 5175, Rims, Stage 2 Jet Chip, Jet Underdrive Pullys, Strut Tower Brace, Subframe Connectors, Speed Calibrator, Lowering SpringsComment
-
hey i found some exhaust clips of the flowmaster 80 series on a 3.4L V6. http://www.geocities.com/pnlt_kck/blkmjctwo.html
What do you guys think of it, I think it sounds awesome. The first recording is the muffler before it is burnt up, how long does it take for the muffler to burn up.
Anyone else have this muffler on their 3.4L, tell me your experiences. [img]graemlins/burnout.gif[/img]Comment
-
<blockquote>quote:</font><hr>Originally posted by fbody4life:
hey i found some exhaust clips of the flowmaster 80 series on a 3.4L V6. http://www.geocities.com/pnlt_kck/blkmjctwo.html
What do you guys think of it, I think it sounds awesome. The first recording is the muffler before it is burnt up, how long does it take for the muffler to burn up.
Anyone else have this muffler on their 3.4L, tell me your experiences. [img]graemlins/burnout.gif[/img] <hr></blockquote>
Takes a few months/few thousand miles. Mine took about 3-4K miles to break in nicely, the longer u have it the louder it gets.
Sounds even nicer w/ a highflow cat/intake [img]smile.gif[/img]<a href=\"http://www.pbase.com/danny83/car_pix\" target=\"_blank\">http://www.pbase.com/danny83/root</a><br /><a href=\"http://community.webshots.com/user/ttopbird96\" target=\"_blank\">http://community.webshots.com/user/ttopbird96</a> [/URL]<br />00 NMB Formula M6<br />323.4HP, 336.5TQ<br />Lid, Filter, Cutout, all else stock :)<p>\"Let the modding begin!\"Comment
-
alright damnit, i know you guys dont have true dual exaust, so how in the hell did you get the 80 series to work, on the flowmaster website it says its for 8's only, meaning its a 2 in 2 out, how do u make it a 1 in 2 out (1 in 2 out is what you guys have right)Camaro 95 3.4L M5<br />Flowmaster 80srs<br />Catco High Flo Cat<br />Slp CAI<br />Prime wheelsComment
-
mike what you need is part #Flo-42583 from summitracing.com It has one 2.5 inch inlet and two 2.5inch outlets. Costs about 72 dollars plus shipping. It says the muffler is for 83-92 v8 fbodies, but fits our 93-up's perfect.Comment
-
dude chill out ever heard of making one for a v6 camaro? yes many companies do this works great for them making money2001 SOM Camaro SS<p>Direct flo lid---Lakewood LCAs----Edelbrock Torque Arm-----Lous Short Stick---Dynomouth 3\" Exhaust---SLP Center Mount Exhaust---Poly tranny and torque arm mounts.<p>My site....http://community.webshots.com/album/49413018hRfdbPComment
-
hey chev cant understand what your questions is, sorry
Comment
-
V-8 camaros and firebirds have similar exhaust setups to a v-6. They are all 1 inlet and 2 outlet.2000 manual blackbird with borla exhaust, slp intake, b&m shifter, plugs and wires, control arms and panhard rod<br />14.94 @93.3 mphComment
-
ok thanks, but what about tips for that muffler, where to find them and how much do they costCamaro 95 3.4L M5<br />Flowmaster 80srs<br />Catco High Flo Cat<br />Slp CAI<br />Prime wheelsComment
-
????Camaro 95 3.4L M5<br />Flowmaster 80srs<br />Catco High Flo Cat<br />Slp CAI<br />Prime wheelsComment
-
Im getting mine from the muffler shop that is installing the muffler. You can also try some websites, but Im not sure exactly which ones. [img]graemlins/thumbsup.gif[/img]Comment
-
that sounds pretty good i say go for it...my flowtech is a little quieter but has a slightly deeper rumble but have fun and enjoy!! [img]graemlins/burnout.gif[/img]Comment
Comment