Tweet
That piece of dryer hose that comes with the whisper lid is a flimsy piece of crap and I want to replace it with something that looks better and flows better or the same. Anyone have any suggestions?
-
-
Oh, and I have a 98, so that stupid angled throttle body will come into play. :mad: :D -
<blockquote>quote:</font><hr>Originally posted by PiLOTLiTE:
That piece of dryer hose that comes with the whisper lid is a flimsy piece of crap and I want to replace it with something that looks better and flows better or the same. Anyone have any suggestions?<hr></blockquote>
I did some checking around a few months ago. One source that has all kinds of hoses (some fairly expensive...) is www.ihozs.com for some burly looking silicone hose used for brake ducting.
The latest JC Whitney catalog has some large diameter hose now too. (3" and 4"). It is rated to 300 degrees.
Also I found this other site that has all kinds of elbows and connectors and things too, in the 3"-4" range. www.jagsthatrun.com
Ducting
http://www.jagsthatrun.com/Pages/Par...ing.html#table
1. 90° rubber elbow, 4" i.d. .25" wall thickness.
2. 90° rubber elbow, 3.5" i.d. .25" wall thickness.
3. 90° rubber elbow, 3" i.d. .25" wall thickness. Stretchable to 3.5" with lots of effort.
4. 45° rubber elbow, 4" i.d. .25" wall thickness.
5. 45° rubber elbow, 3.5" i.d. .25" wall thickness.
6. 45° rubber elbow, 3" i.d. .25" wall thickness.
7. 90° rubber elbow, 4" i.d. .25" wall thickness. Same as #4. Can be connected to throttle body.
8. 90° rubber elbow, 4" i.d. x 3.5 " .19 " wall thickness. Can be connected to throttle body and to #6.
9. 90° rubber elbow, 4" i.d. x 3.0 " .25 " wall thickness. Can be connected to throttle body.
10. 4" o.d. aluminum tubing.
11. 3" o.d. aluminum tubing.
12. 3.5" o.d. aluminum tubing.
I haven't done anything about mine yet... Also a '98. If you come up with something you like, let us know!\'98 A4 Camaro v6->v8 conversion, and STS kit next<br />v6: 13.6 Powerdyne, 13.2 150 shot, 13.8 120 shot, 14.3 85 shot, 15.7 stock<br />v8(na): 12.18@113, 392rwhp<br />Moderator on <a href=\"http://www.mtfba.org\" target=\"_blank\">www.mtfba.org</a> and <a href=\"http://www.frrax.com\" target=\"_blank\">www.frrax.com</a> (Road Race & Autocross)<br /><a href=\"http://community.webshots.com/user/johnduncan10\" target=\"_blank\">Car pics</a>, <a href=\"http://www.trscca.com\" target=\"_blank\">TN Region SCCA</a>Comment
-
Maybe a peice of fernco hose. Which can be bought at any home improvement store.Keith - 99 'maro - White M5 - bumpstick and boltons - 13.65 @ 101 N/A
"I ain't too big to listen to the rumors, I'm just too @#$% big to pay attention to them" - Dr. Dre
http://seppo.hopto.org/Comment
-
You can get the rubber hose the turbo import guys use its some heavy duty hose material and comes in a variety of colors so you cna color coordiante your engine bay :rolleyes:
But seriously it is some good stuff.2001 Blue Firebird.<br />V6 M5. free ram air mod, 3\" pvc intake, Air temp module, 3\" exhaust, Dynomax 3\"straight through exhaust, O2 sim with off road pipe.<p>Kenwood kdc-mp919 head unit, kfc-628 and kfc-748 amps, Kicker I650 mids/highs, 12\" kenwood WS-303 sub<br /><a href=\"http://www.trafficjamzcaraudio.com\" target=\"_blank\">www.trafficjamzcaraudio.com</a><p>1500 years ago the world was the center of the universe. 500 years ago the world was flat. 15 minutes ago we were alone on this planet. Just think what you will know tomorrow.Comment
-
Wanted to dig this up to see if anyone has done anything or have new info. I still have my crappy dryer hose. :DComment
-
same here.....- \"So you have something to look at when you\'re talking to \'em\" - <br /> <a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=296916\" target=\"_blank\">http://www.cardomain.com/member_pages/view_page.pl?page_id=296916</a>Comment
-
I have some good racecar hose that I'm using...I still have plenty left over. I paid about $75 for 10ft of it so I will sell it for the same price per foot + shipping. I can get pics tomorrow for those that want them. I used it to connect my Clear MTI Lid to my 98 TB and the stock box to the TB as well.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
<blockquote>quote:</font><hr>Originally posted by speedy-v6-camaro:
I have some good racecar hose that I'm using...I still have plenty left over. I paid about $75 for 10ft of it so I will sell it for the same price per foot + shipping. I can get pics tomorrow for those that want them. I used it to connect my Clear MTI Lid to my 98 TB and the stock box to the TB as well.<hr></blockquote>
I'll call dibs on some pending some pictures and trip to the hardware store tomorrow. How much does one need? Like 1-2 feet? And I take it that hose is 4'' diameter?Comment
-
<blockquote>quote:</font><hr>Originally posted by PiLOTLiTE:
I'll call dibs on some pending some pictures and trip to the hardware store tomorrow. How much does one need? Like 1-2 feet? And I take it that hose is 4'' diameter?<hr></blockquote>
4" diameter...its good to 600F too...1-2 ft is enough as long as you are careful and don't screw up. For a 98 I do recommend taking the lid off and hooking up the TB tightly and then hooking it to the lid and lastly installing the lid. BTW its a black hose with some light yellow cord where the wire is....but you will see that...it looks better than the dryer hose I had before.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
Go to home depot... go to the PVC aisle...
they ahve rubber drainage hosing... with hose clamps on either side...
I haven't measured it up yet but you might be able to find a piece big enough...
I used it on my 3.4L CAI
It can be like 2in. to 4in. in diameter(internal diameter) and is about 1/4 thick if rubber.Comment
-
put me down for some footage of that stuff...
send me a pic of your setup...
thanks- \"So you have something to look at when you\'re talking to \'em\" - <br /> <a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=296916\" target=\"_blank\">http://www.cardomain.com/member_pages/view_page.pl?page_id=296916</a>Comment
-
<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
Consider 2ft sold. E-mail me with total price with shipping and how you want payment. :DComment
Comment