Tweet
need the part number for the 3.4 exhaust manifold gaskets, if im not mistaken they're suppose to be the metal ones.
Thanks guys
<insert part number> [img]smile.gif[/img]
Thanks guys
<insert part number> [img]smile.gif[/img]
-
---Niño---<br /><i>95\' silver 5 spd</i> -
Do you want the GM part number or the FelPro number?- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a> -
MS90864 is the FelPro part number.
24506009 might be the GM part number, but my catalog doesn't show for sure if that works on the 3.4L [img]smile.gif[/img]<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a> THE SOURCE!Comment
-
GM please :DOriginally posted by viper98885:
Do you want the GM part number or the FelPro number?
I was thinking FelPro, but did some research and found only one post which said they werent as good as the paper gaskets that come w/ the pacesetter's guess who said that. ;)
GMPARTSDIRECT states that it's a gasket, thats about itOriginally posted by OneQuickV6:
MS90864 is the FelPro part number.
24506009 might be the GM part number, but my catalog doesn't show for sure if that works on the 3.4L [img]smile.gif[/img]
Im starting to get some nasty leaks and Im retightening the bolts but it's not helping much. I figured id just get those.
[ June 29, 2004, 06:38 PM: Message edited by: pontiac nino ]---Niño---<br /><i>95\' silver 5 spd</i>Comment
-
ttt [img]graemlins/burnout.gif[/img]---Niño---<br /><i>95\' silver 5 spd</i>Comment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...4 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment