Air lid gasket? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Air lid gasket?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Air lid gasket?

    well, i was finally able to get a whisper lid, but i noticed that it doesn't have a gasket for a good seal like the stock lid does.

    does anyone know of where i can get that gasket or should i just make one with foam tape? The stock gasket is glued to the stock lid, so i just can't remove it.

    thanks.

  • #2
    Re: Air lid gasket?

    I put mine on without a gasket, it sealed really tight.

    Comment


    • #3
      Weather stripping or something would do the trick, should be at your typical parts store
      Wait, Is that a V6 or V8?
      1990 Chevrolet C-K 1500 series 4.3L .. 5spd
      1994 JDM Euno Roadster 1.8L 5spd Bolt Ons.. etc
      2000 Camaro 3.8L Auto Bolt Ons..etc

      Comment


      • #4
        Re: Air lid gasket?

        Originally posted by KJZ28 View Post
        I put mine on without a gasket, it sealed really tight.
        agreed with this. when i put mine on it was as snug as it could possibly be and still clip down. can you give us pics?
        pacesetters|full 3" borla exhaust|3" stainless e-cutout|slp cai & ram intake|c/f whisper lid|tbs|eibach|kyb|stb|sfc's|adj.lca's & phb|slp fan|b&m t5|180*|z06 17x9.5|8000k hids|hptuners|d/s rotors


        sigpic
        gone in body, but not in spirit

        Comment


        • #5
          Re: Air lid gasket?

          haven't been able (plus i keep forgetting) to add any weatherstripping or anything, but i haven't noticed a problem at all. it does seem to be pretty tight, but i wasn't sure if i needed to add anything or not.

          if i remember next time i drive by the auto store and i can find something pretty cheap, i might do it. if not....i don't think i'll lose any sleep over it.

          Comment


          • #6
            You will be fine haha, losses will be minimal if any :) sleep tight
            Wait, Is that a V6 or V8?
            1990 Chevrolet C-K 1500 series 4.3L .. 5spd
            1994 JDM Euno Roadster 1.8L 5spd Bolt Ons.. etc
            2000 Camaro 3.8L Auto Bolt Ons..etc

            Comment


            • #7
              Re: Air lid gasket?

              losses!!!! crap...i better get on that then! :)

              Comment


              • #8
                Re: Air lid gasket?

                The Whisper lid never felt like it sealed.. I went with a SLP lid on my LS1 and that thing seals like a champ.
                Jeff ..
                1998 Firebird.. Built 3.8 with a 125 shot.. 370rwhp,415rwtq.. stock tune!! sold

                2002 WS6 T/A.. Bolt ins..448rwhp
                2009 G8 GT.. Vararam intake, GXP axleback
                1998 Corvette.. Vararam intake, Ti axleback
                http://www.fquick.com/slow-v6

                Comment


                • #9
                  Re: Air lid gasket?

                  Foam tape.
                  I solemnly swear I am up to no good.

                  2008 Saturn Sky Red Line - Midnight Blue

                  Pewter Mafia - 2000 Firebird - SOLD
                  CENTRAL FLORIDA KNIGHTS!!!!!!!
                  FLORIDA STATE SEMINOLES !!!!!!!

                  Comment


                  • #10
                    My stock lid never had a gasket until I bought a k&n filter and it came with one to put in the stock lid

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X