upper radiator support

[Lilspleen]

will this fit the 3.8 v6 with some slight modification or will it not work at all?
http://www.hawksthirdgenparts.com/lt...cover-1-1.aspx

[ssms5411]

Re: upper radiator support

I picked up a polished one on ebay for like $40 for my 96', just recieved it and looks great. Also the V8's and V6's are the same.

[BallerMaro13]

Re: upper radiator support

i assume it wouldn't work with a 98+ bc of the air lid? should fit the 93-97 with no problem from my understanding, and i'm guessing it would work with turbo applications due to not needing a lid?

[Lilspleen]

Re: upper radiator support

i have a 98, but doesnt it take the whole airbox assembly out and just has that plate. so that way i can do a cold air intake

[Fondle]

Re: upper radiator support

i have a 98, but doesnt it take the whole airbox assembly out and just has that plate. so that way i can do a cold air intake

dont! the lid is better than a cai

[crazytrain65]

Re: upper radiator support

i have a 98, but doesnt it take the whole airbox assembly out and just has that plate. so that way i can do a cold air intake

i thought 98's had angled throttle bodies and such>

[tcrenegade50]

Re: upper radiator support

^^^^what he said!

[LETZRIDE]

Re: upper radiator support

98's do have angled tbs....its only 99 and above that are straight...

[Blizzard242]

Re: upper radiator support

I gotta get one. The empty rad cover without a lid looks nasty. I'm putting this on my 98 obviously but, do all the years have the same fit?

[Lilspleen]

Re: upper radiator support

I gotta get one. The empty rad cover without a lid looks nasty. I'm putting this on my 98 obviously but, do all the years have the same fit?

That's what I was wondering that and if the v8 is the same

[LETZRIDE]

Re: upper radiator support

I gotta get one. The empty rad cover without a lid looks nasty. I'm putting this on my 98 obviously but, do all the years have the same fit?

weight savings...makes you that much faster ;)

[97rs4life]

Re: upper radiator support

v6 and v8 will both be the same. 98s can go with a polished metal one and run a CAI to the fender if they like. Or stick with the lid and not get one of these covers. 99-02 would have to ditch the lid and run a CAI as well. Not worth it for the 99-02 crowd as the lid is a better setup with the straight shot it has going into the engine

[Blizzard242]

Re: upper radiator support

weight savings...makes you that much faster ;)

lmao, i'm not trying to break any records. If I was, I'd have 2 turbos instead of one.. Hm.. I should do that.

[BallerMaro13]

Re: upper radiator support

blizzard...twins...go.


kthx! :D

[LETZRIDE]

Re: upper radiator support

v6 and v8 will both be the same. 98s can go with a polished metal one and run a CAI to the fender if they like. Or stick with the lid and not get one of these covers. 99-02 would have to ditch the lid and run a CAI as well. Not worth it for the 99-02 crowd as the lid is a better setup with the straight shot it has going into the engine

what about if they bought that, but just cut out a whole where the lid would sit?...cut it just slightly smaller then the edge of the lid, so that you can't see that it is cut?