Tweet
I am looking for a set of 96 3.8 heater hoses. Chevy does not make them and I can't find a parts store that even has them in there computer. Even E-bay does not have them. Anyone have any ideas? Thanks, Pat.
-
-
Re: Heater Hoses
If your talking about the funky crimped metal-rubber masterpiece that some fluids engineer at GM thunk up, I think most people just cut off the factory crimps and put on molded hose rather than replace the unit as a whole. They autoparts stores sell them in pieces. At least they do for my 95 last I checked. -
Re: Heater Hoses
advance has a kit to convert to rubber molded hoses...Y87 Package
MANUAL CONVERTED, Pro 5.0 Shifter
Pacesetters, Magnaflow Cat, Cutout, Flowmaster
MOGOB APPROVED!
BONE APPROVED!
VANBIBBER APPROVED!
KRISTEN APPROVED!
Vice Prez.
Team Black...TEAM EMO
sigpic
Come on kids! Get a Calendar!Comment
-
Re: Heater Hoses
Are you talking about the hoses that come off the belt tensioner assembly and go to the heater core? If so GM makes them and I picked up the hose myself a few years back for less than a hundred from gmpartsdirect.com
good luck, I didn't have tools to get bolt out that hose mounted to car between the motor and the wheel well and had to have dealer do it.Originally posted by kala
TEAM BLACK!!!
parting her outComment
-
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...5 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment