Well guys I just bought a 3800 Series II engine with tranny. Now my question is if I buy the 3800 series II RWD intake will it fit in a Camaro? I bought a whole car with that engine and it was really cheap so I want to know if I can use the engine for my Camaro, if not I will be selling it for parts :naughty:.
Announcement
Collapse
No announcement yet.
FWD 3800 II motor
Collapse
X
-
Re: FWD 3800 II motor
Thanks alot for the info. I was already getting ready to sell it to some one who was going to give me $200 for it. But now it is going to be a project that is going to involve some rebuilding before it even touches my camaro. guess my 3.4L is going to be sold or scrapped for parts for a 3.1L I have. Thank ALOT Chevyinside :banana::rock:
Comment
-
Re: FWD 3800 II motor
Originally posted by elkindw View PostI dont think so. Im pretty sure that it wont mount up right. I know for a fact the trans wont though.
Comment
-
Re: FWD 3800 II motor
Intake, oil pan, front engine accessories (alternator bracket, power steering pump bracket) You need an f-body coil bracket as well, f-body exhaust manifolds, f-body pcm and wiring harness to mate with your current f-body in car harness, obd2 port. In short, it's going to be a pain in the ***.<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>
Comment
-
Re: FWD 3800 II motor
What if i have a OBDI f-body. will i have to get all of the wiring for it as well?Last edited by insaneABOT; 04-09-2008, 10:00 PM.
Comment
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...2 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment