pro magnum 1.9 roller rockers... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

pro magnum 1.9 roller rockers...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pro magnum 1.9 roller rockers...

    am i soposed to use new push rods with these?

    http://www.zzperformance.com/grand_p...=129&catid=104

    Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

  • #2
    Re: pro magnum 1.9 roller rockers...

    you dont have to, but it certainly wouldnt hurt.

    Comment


    • #3
      Re: pro magnum 1.9 roller rockers...

      what kinds of problems were you actually having with these rockers UDLOSE?

      Comment


      • #4
        Re: pro magnum 1.9 roller rockers...

        i never had any problems with my rockers. I had problems with the collars that went into the rockers. Caused one pair to chip and I had to get a new pair, and new valve components

        Comment


        • #5
          Re: pro magnum 1.9 roller rockers...

          what am i to gain from different push rods?

          Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

          Comment


          • #6
            Re: pro magnum 1.9 roller rockers...

            stronger pushrods.

            Comment

            Latest Topics

            Collapse

            • Vladimir Gecko
              Low Voltage
              by Vladimir Gecko
              I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...
              10 hours ago
            • LETZRIDE
              New Owner!
              by LETZRIDE
              I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
              6 days ago
            • ssms5411
              Little work today
              by ssms5411
              Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
              3 weeks ago
            • LETZRIDE
              Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
              by LETZRIDE


              Building the Tom Henry RS
              Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
              By: Hib Halverson


              At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
              Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
              02-07-2020, 10:30 PM

            FORUM SPONSORS

            Collapse
            Working...
            X