cigeratte lighter - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

cigeratte lighter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cigeratte lighter

    When i bought my car, it didnt have the cig. lighter assembly. All there is is a hole with a wire in there... i cant really see whats going on, but i assume the wire is taped up. Is there any way to put a new assembly in?

    Anyone know how?

    Thanks

  • #2
    yeah just go to your local auto parts store i know autozone has a book to match up which one you need that will fit the hole.
    1990 Firebird 3.1 T-Tops<br />Flowmaster exhaust<br />Kenwood MP 825 Deck<br />4\" Rockfords w/ tweet in dash plate<br />3 Way 6x9 Rockords in rear sails<br />1970 Camaro 350

    Comment


    • #3
      LOL mine is the same way, i think its pushed in there.
      <a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.

      Comment


      • #4
        it's simple. . especially if the wires are still in there, check and make sure the fuse is there, & not blown, two wires... power and ground.
        *Matt


        Old people shouldnt use the internet.

        Comment

        Latest Topics

        Collapse

        • LETZRIDE
          New Owner!
          by LETZRIDE
          I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
          3 days ago
        • ssms5411
          Little work today
          by ssms5411
          Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
          2 weeks ago
        • LETZRIDE
          Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
          by LETZRIDE


          Building the Tom Henry RS
          Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
          By: Hib Halverson


          At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
          Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
          02-07-2020, 10:30 PM

        FORUM SPONSORS

        Collapse
        Working...
        X