i have to leave for work in about 2mins..i've had countless gaskets replaced on my motor...intake 2times just had the oil pan and rear main and rear main housing gasket...and i am smelling oil again...i haven't had a chance to get underneath it and look to check the gaskets just changed...but i was asked by my mechanic where the crankcase breather is located..thinks that might be the issue..like i'm building up pressure.
Announcement
Collapse
No announcement yet.
crankcase breather??
Collapse
X
-
PCV valve is located under the little black plastic cover on the upper intake manifold.Matt
1998 Mystic Teal Camaro M5
Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.
-
i argued with this guy for 10mins about that and he said there has to be another vent ...said the pcv doesn't work at wot..or even half throttle..he said it sucks it in but there has to be somewhere else that lets it out..i have no clue..98 bird Y87 SLP cai Msd Super Conducters Msd coils Splitfire Triple Platinums big bad Corvette servo
Comment
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...2 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment