im trying to remove my cam in my 3.4 and i heard that theres a bolt in the back holding it in. i only saw one bolt on the drivers side in the back and i think its on the head. does anyone know if there is one or not?
Announcement
Collapse
No announcement yet.
cam removal
Collapse
X
-
Re: cam removal
I do not know of the exact location but nothing else I am aware is back there even close to being similar.
Comment
-
Re: cam removal
never done it but the manual says you have to
1) loosing the rockers out of the way and take out the lifters(make sure you lable them some how to make sure you put them back in the right place)...
2)then you take off the timing cover and sprocket
3)make room in the front....by taking off the radiator, etc
4)and yes also take off the oil pump drive .....if you have a haynes its on page 2a-9....top right...this parts is more near the back of the motor near the passenger side head...it has one bolt that hold the c like clamp then you pull it out...you might have some trouble taking it out i tried and couldnt...but it says it just comes straight out.
Comment
Latest Topics
Collapse
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...5 hours ago
Comment