Fan switch - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Fan switch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fan switch

    Well i did a search on manual fan switches today , and found a "how to do" thing by one of the people from this site , thanks for it , helped a ton and wasnt to hard to do at all , well my question is just a simple one , on high speed is it normal for only one fan to go?On low both come on.

  • #2
    Re: Fan switch

    no one?

    Comment


    • #3
      Re: Fan switch

      It is louder it is just one fan though , i dont see how i can have the wires switched , its only 2 wires , either way they both go to an ON connection of the switch

      Comment


      • #4
        Re: Fan switch

        my write up.

        high is one fan

        low is one fan

        It's normal.. if you listen, when the fan is on high it should be alot louder than the low speed.

        Glad the how-to helped.
        *Matt


        Old people shouldnt use the internet.

        Comment


        • #5
          Re: Fan switch

          Originally posted by StrtRacer98
          my write up.

          high is one fan

          low is one fan

          It's normal.. if you listen, when the fan is on high it should be alot louder than the low speed.

          Glad the how-to helped.
          On my 97, low speed was both fans, and high speed was both fans.
          <a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.

          Comment


          • #6
            Re: Fan switch

            It was only 2 wires right? my low speed is both fans , but high is just the one ....Mines a 96 , would that make any difference?

            Comment


            • #7
              Re: Fan switch

              mine was 2 wires, and a ground wire. Tapped into like H and J on the harness
              http://www.bowtiev6.com/

              Comment


              • #8
                Re: Fan switch

                Yea i have those same wires hooked up , maybe a fuse? what would be a reason that fan isnt working.....but yet is is....

                Comment


                • #9
                  Re: Fan switch

                  Originally posted by logan13883
                  It was only 2 wires right? my low speed is both fans , but high is just the one ....Mines a 96 , would that make any difference?
                  Put your AC on, this brings both fan on low speed. Now, with the ac still on, put your fan switch in the high postion. Now both your funs will run high speed.
                  <a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down.

                  Comment


                  • #10
                    Re: Fan switch

                    Well i gave it a try...and it worked! thx for that bobby , was starting to get a little annoying . and if thats what i have to do to get em to both come on then so be it .

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X