Today my camaro started making a noise when ideling...I dont know if its making it when I drive I cant hear anything but the exahaust. The story is yesterday I was going to take my starter to get a new one but something came up and I had to just throw the old one back in. So could I of put the metal "shim" thing back in wrong?? I think it was between the starter and where you bolt it in. I just started and gets louder as I let it sit there. When I hit the starter when the car is running I hear the quick grind noise but I dont hear the other noise, five seconds later its back. What can this be?? I also replaced the front brake pads but I know that cant have anything to do with it.
Announcement
Collapse
No announcement yet.
A Noise!!!!!!!!
Collapse
X
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...2 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment