Tweet
Well I'am having trouble power braking in my V6er and i was wondering if thats normal or a defect on my car. [img]graemlins/burnout.gif[/img]
-
-
I don't know why, but there is something telling me that power braking is very bad for cars! If you want your rear wheels to spin without moving the rest of the car, install a line-lock.
Just something telling me that standing on the brake pedal and standing on the gas at the same time will do some serious damage within time.
Most of the cars I have ever owned were stick shifts, and the few auto's I owned were NEVER victims of power braking as long as I had them.
-Marcsigpic -
I was able to do it, even when I had 3.08's
<a href=\"http://www.cardomain.com/id/sean37\" target=\"_blank\">Black \'97 Camaro</a> w/ CAI, catbackComment
-
Dont push the breaks so hard.
1.)Push the break
2.)Push(DONT SLAM)the gas
3.)If the car doesnt move, slowly release the breaks until the wheels start spinning and smoke fills the air :D
Shane00 Pewter Y87 Camaro-SS Hood/Chrome rims, Black Halos, Clear corners, Pacesetters, V8 K&N FIPK, 3\" B&B TriFlow, HPP3, MSD Coils, Taylor wires, Transgo stage II, Edge 3000 Stall, 180* thermo, SLP Bowtie Grill<br /><a href=\"http://www.cardomain.com/memberpage/468763/1/\" target=\"_blank\">Carro</a>Comment
-
put your 3rd foot on the clutch and slowly let out as you mash the gas with your 1st foot while pressing the brake all the way down with your 2nd foot, keeping an eye on your RPM's holding them under red line, slowly let off on the brake til you start moving and accelerate
thats what i do! :D96 3.8L V6 Camaro 5-Speed<br />Vroom Vroom<br />No Power Doors / No Power Locks<br />Removed Jack and Spare<br /><a href=\"http://www.cardomain.com/id/mikerob283\" target=\"_blank\">CarDomain - Mikerob283</a>Comment
-
<br /><br /> <a href=\"http://www.cardomain.com/id/nitroxxx28\" target=\"_blank\">http://www.cardomain.com/id/nitroxxx28</a>Comment
Comment