from 3.08 to 3.42

[99camaropkg]

what all do i need to buy for the gear install?
i aint gettin the lsd yet that is about 2 weeks after. will i need a abs reluctor ring or anything like that or just the gears?

[mjparme]

This info is available by searching and is probably better off in the drivetrain forum.

However, here are the parts you will need:

64047 Installation Kit 119.95 114.95
64501T Zexel-Torsen LSD 99.95 94.50
64048 3.42 Gears 239.95 229.95
26029 ABS Reluctor Ring 19.95
Tech Edge Mini-Speedo Recalibrator 99.99

The first column is the SLP part number from http://www.slponline.com, the first price listed is the SLP price. The second price listed is the price at http://www.ammperformance.com.

The speedo recalibrator is from http://www.intense-racing.com and has code TEC-SRC (I guess that is their part number).

Also, I believe the gears are only $199 from http://www.tbyrne.com (same gears you will get from SLP which are GM Motives)

[ December 03, 2003: Message edited by: mjparme ]</p>

[Blizzard96]

Anyone used that speedo recalibrator?

[Dekay]

You need a new carrier if you're going from 3.08's to anything higher.

[99camaropkg]

what is a carrier?

[John_D.]

It's that big thing in the rear end that you bolt the ring gear up to.

[98Camaro3.8]

<blockquote>quote:</font><hr>Originally posted by 99camaropkg:
what is a carrier?<hr></blockquote>

AKA the differential. ;)

[speedy-v6-camaro]

I got a package of everything you need in the for sale section. I have a SCU2000 too if you need it.

[99camaropkg]

can i wait about a month for the differential, just i have just enough for the gears now

[98Camaro3.8]

Since you've got 3.08s now, you'll have to either do them at the same time, or get the LSD first.

[ December 05, 2003: Message edited by: 98Camaro3.8 ]</p>

[99camaropkg]

OK here is an update on what i have so far.

Zexel Torsen LSD
3.42 gears
Transgo Shift Kit
Jet 4L60E Corvette Servo piston
ABS Reluctor Ring
JET SCU2000

Is there anything else i absolutely have to have for my install? I am getting a tranny shop to do all of it.

[99redcamaro]

i think you got all you need [img]smile.gif[/img]

[99camaropkg]

ight thanks, i am ready to get them installed after christmas, i should hope be at 15 flat and with some prayers maybe better. [img]smile.gif[/img]

[mjparme]

You will also need a full install kit.

[98Camaro3.8]

<blockquote>quote:</font><hr>Originally posted by mjparme:
You will also need a full install kit.<hr></blockquote>

Not if he takes it to a shop, which he already said he is.