Tweet
ok so I just put the car back together from the last 2 days of hell. now the Alt is not charging the battery correctly, the tension pulley is on the way out and every time I turn the wheel the belt squeaks. is it possibly the charging problem is caused by the belt being loose? its the exact same symptoms as when I did my headers. I didn't hook up the plug that goes on top of the alt. it charged the battery enough to run for 2 days but it eventually died on me. even if I revved it up it the voltage wouldn't change. well its the same problem all over again but the plug is in place. IDK, could I have messed up something internally in the alt? I know it rained hard last night but I don't think the alt got wet.
-
95 Firebird<br /> <a href=\"http://www.cardomain.com/memberpage/673250\" target=\"_blank\">http://www.cardomain.com/memberpage/673250</a> <br /> <a href=\"http://photobucket.com/albums/y217/andrewbrandon19/\" target=\"_blank\">http://photobucket.com/albums/y217/andrewbrandon19/</a> <br /><br />me on a good day------> <a href=\"http://communicatio.webblogg.se/images/wet_cat_113159625.jpg\" target=\"_blank\">linky</a> -
Re: charging problem
is your belt on right? and could it be stretched out? i doubt water woudl harm it. cause when i clean my engine my alt. gets wet and is fine. but mayeb youjust didn't hook it up rightWAWA-A-HOLIC
-
Re: charging problem
thats all it was, the tenson pully. I went to pull the belt and it just fell off the pullies. everythign works great now advanced had one for $26 and I am good to go.95 Firebird<br /> <a href=\"http://www.cardomain.com/memberpage/673250\" target=\"_blank\">http://www.cardomain.com/memberpage/673250</a> <br /> <a href=\"http://photobucket.com/albums/y217/andrewbrandon19/\" target=\"_blank\">http://photobucket.com/albums/y217/andrewbrandon19/</a> <br /><br />me on a good day------> <a href=\"http://communicatio.webblogg.se/images/wet_cat_113159625.jpg\" target=\"_blank\">linky</a>Comment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...5 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment