Tweet
Or when I go through a car wash, It misfires in cylinder1 for about like say 10 minutes if that. Never longer than that. I was just wanting to knwo what could cause this?!
-
-
Replace the wire. Somewhere alont the line it's letting water get into it and cause a short.
-Marcsigpic -
i had a similar problem. the only thing though i had a misfire at wot also. but when i ran it through the car wash it was misfiring like crazy then after like ten minutes it was back to original misfire at wot. changed the wires and problem fixed... i hope that helpsComment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...3 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment