Who posted Top Speed 4 A 3.8?

[Anti Spark]

I've been trying to get a number from here and other boards.

Does someone here have a correct Top Speed?


And What did they use to Remove the SpeedLimter?

[Seal]

well, with the limiter its 118, without it I would like to know as well [img]smile.gif[/img]

you can use jetscu2000 to remove the speed limiter, am there are other thigns to remove it am sure...

[slacker69]

I thinkk it was 145

[W68Firebird97]

Well I dont know how fast i was going,but i buried the needle. And it was still climbing. I shifted into 4th gear at 110. Not sure about the top speed tho.

[9t9fb]

I know someone posted that it was 145 MHP.But that was the M5 with 3.23 gears and a few mods.

[Dominic]

It was probably me, and it was between 140-145mph with 3.23 gears and a T5 in a newer camaro. Best guess is through using a spreadsheet a friend of mine built and gave to me as a top speed calculator given a flat road with no headwind etc etc. The good part is it factors in frontal area and drag coefficienct, also horsepower per gear per RPM. So you can see how gearing will affect the outcome of your topspeed.

I got the highest theoretical top speed using 3.73s in a M5, and that was near 148. [img]smile.gif[/img]

[Seal]

dang really, our cars go pretty fast [img]smile.gif[/img]

i wanna get 160, altough i never will need it :D

[12secondv6]

I've been to 145 in my bird racing an ls1
superchips custom programming

[ June 24, 2002: Message edited by: 12secondv6 ]</p>

[Seal]

I assume n/a? or not

[JVT007]

I thought the limiter couldn't be taken off? How much is this thing that does it? Not that I would ever need it [img]smile.gif[/img]

[Jason McCallister]

Hypertech had my car up to 145 MPH on the dyno. Real world top speed would be lower due to rolling resistance, wind resistance, temperatures, etc...