manual fan control switch? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

manual fan control switch?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • manual fan control switch?

    just a quick question, does the man. fan control switch sold on slp thnderracing or where ever work on our v6's, the reason i ask is because i have heard that it doesn't and here in san antonio, traffic sux, and it would be great to keep the temp down while im just sitting there, or in the staging lanes at the track, just curious because i would like to get one but i wanna make sure it'll work, thanks

    merlin
    2002 Firebird<br />2003 Yamaha YZF 600R

  • #2
    Works on my 2001.
    2001 Camaro M5 Coupe(1 of 2,737), no options, Whisper Lid, K&N Air Filter, Free Ram Air, MAFS Screen removed, SLP Manual Fan Switch, 160 thermo, DEE\'s T/B Spacer, EGR Block-off plate, IAT resistor, CAI to EGR air feed, B&M Ripper Shifter, SLP Replacement Grill, T/A Exhaust, SLP five spoke take-off wheels, BMR strut-tower brace, BMR Tunnel Brace, BMR 32/21 front & rear sway bars with poly, BMR Poly/Combo Rear Control Arms, Clear front & rear corners, HPP3 modified 87 Octane program.<p><a href=\"http://www.cardomain.com/id/red2k1\" target=\"_blank\">http://www.cardomain.com/id/red2k1</a>

    Comment


    • #3
      You should have no problems at all.

      Comment


      • #4
        works great on my 00. even in san antonio :D
        6s.......under the hood or under the belt, they just dont cut it.

        Comment


        • #5
          those will work but you could do it yourself for about $20.00, it works exactly the same as the ones from slp.


          manual fan install


          :D
          98 camaro 3.8 (THE PUNISHER)<p>JET STAGE II/B&M SHIFT PLUS/TAYLOR WIRES/SLP LOUDMOUTH w-3\" s- pipe/SLP CAI/SS MESH GRILLE/160 STAT/DERALE OIL COOLER<br />FLEXALITE TRANS COOLER/ 3.42-ZEXEL-TORSEN/KONIG MONSOON & KUHMO TIRES/MANUAL FAN SWITCH/1le sway bars & poly/KYB AGX SHOCKS/H&R SPRINGS/LS1 ALUMINUM DRIVE SHAFT/rk sport headers<p>WAITING FOR INSTALL:ssm heads,cam,3 angle valves/trans go shift kit

          Comment

          Latest Topics

          Collapse

          • LETZRIDE
            New Owner!
            by LETZRIDE
            I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
            5 days ago
          • ssms5411
            Little work today
            by ssms5411
            Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
            3 weeks ago
          • LETZRIDE
            Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
            by LETZRIDE


            Building the Tom Henry RS
            Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
            By: Hib Halverson


            At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
            Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
            02-07-2020, 10:30 PM

          FORUM SPONSORS

          Collapse
          Working...
          X