Tweet
What is the cheapest clutch I can get? I just need the clutch plate and I need it cheap...
-
\"If I have seen further, it is by standing upon the <br />shoulders of giants.\" (Isaac Newton) -
did a quick lookup.. cheap for a clutch kit for our cars is obviously a relative term!..
advance autoparts has one for around 300.. for that price I'd just order a stage 1 from spec.. spend the extra few dollars and get a good one.. I realize you are getting rid of your car.. but I seriously doubt you will get this cheap.. maybe call a junk yard and see if you can get a low mileage one off of a car.. try to get the clutch, pressure plate and flywheel.. that way everything is matched as far as wear goes..-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock: -
How bad will the wear matter? Noticable?\"If I have seen further, it is by standing upon the <br />shoulders of giants.\" (Isaac Newton)Comment
-
sorry for the late reply.. what do you mean? if everything is worn too much you get clutch slippage.. well as far as the used stuff.. I guess if you got one that wasn't worn out you could smooth it out.. see by getting used stuff you stand the chance of having the car jerk when you let off the clutch.. it would be similar to installing a new clutch and not having the flywheel resurfaced.. I mean this is really a preventative thing.. just like having a flywheel resurfaced.. you don't HAVE to have it done.. but you have about a 95% chance of the flywheel and clutch not mating properly and making the car buck like crazy on start off..-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:Comment
-
I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...11 hours ago -
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...6 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment