I just got an aluminum friveshaft. Should I change the u-joints just to be safe? Can I do it myself or what? Thanks
Announcement
Collapse
No announcement yet.
Changing u-joints needed?
Collapse
X
-
Re: Changing u-joints needed?
You might as well change them out as cheap as they are. If there is an old u-joint in the new ds you will probably see what looks like a couple little plastic pins that will need to be heated to remove. You will probably need a torch, and point it away from you when heating as the plastic will come puking out of there.
Comment
-
Re: Changing u-joints needed?
Originally posted by cam98aro View Postget a socket that will fit the cap on the u joint and start bashing it with a hammer-<i>Travis</i><br /><b>99 Trans Am, Pewter, A4</b> Forged, stalled, and cammed<br /><b>85 Buick Regal WH1 T-Type</b> It\'d be cool if it ran...<br /><b>94 Camaro 3.4, Teal, M5</b> The daily beater
Comment
-
Re: Changing u-joints needed?
I drilled out the plastic pins. Then used a vise.
Dont forget to insall the retainer rings.
If the u joints arent bad (they prolly arent) id use them till they get loose. If and when they start to wear out you can just jack the car up and undo 4 bolts. Then theres your driveshaft again. if this were a part tucked away between your floorboard and tranmission i would go ahead and swap em. But since its so easy just use em, tear em up then replace.
Past my bedtime, Sorry or any Grammer mistakes
Comment
-
Re: Changing u-joints needed?
Originally posted by chevy3504me View PostI drilled out the plastic pins. Then used a vise.
Dont forget to insall the retainer rings.
If the u joints arent bad (they prolly arent) id use them till they get loose. If and when they start to wear out you can just jack the car up and undo 4 bolts. Then theres your driveshaft again. if this were a part tucked away between your floorboard and tranmission i would go ahead and swap em. But since its so easy just use em, tear em up then replace.
Past my bedtime, Sorry or any Grammer mistakesauto, aluminum driveshaft, Fast Toys Ram Air, !air silencer, smoothed lid, Pacesetter shorties, 2 1/2" exhaust, !cat
New Time:
15.11@91.14
Team 3M Mafia
New Times coming soon
Comment
Comment