Tweet
does anyone know which 3.8 gtp blocks will fit a 97 camaro rs?
-
-
Re: 3.8 gtp engine in a 97 camaro rs?
the block itself are all the same as long as it's a 3800 series II
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted -
Re: 3.8 gtp engine in a 97 camaro rs?
If I swap my non-supercharged 3800 for a supercharged 3800 gtp will I a whole new PCM or can I simply have it reprogrammed?Originally posted by Meatyshells View PostComment
-
Re: 3.8 gtp engine in a 97 camaro rs?
wait, are you using the block from a gtp or the whole engine?
the engine from a gtp isnt going to work in your car with out a ton of work
Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual convertedComment
-
Re: 3.8 gtp engine in a 97 camaro rs?
Unless you have the time, skill, and money....i wouldn't do this swap.Comment
-
Re: 3.8 gtp engine in a 97 camaro rs?
It would be chaeper and have more power just to add a turbo, if your thinking about doing a roots type blower.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: 3.8 gtp engine in a 97 camaro rs?
I'd just be swapping the blockComment
-
I recently ran into a problem where when I drove my battery gauge showed low voltage. I compulsively replaced the battery and it was still doing the same...1 day ago -
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...1 week ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...3 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment