Tweet
Pulled an Engine!!
Man all that hell for this little block... Good quality time with the dad on this proj. THAT WAS A TIGHT PULL. from the top in a cramped garage, but now that the car is in the driveway, we have plenty of room:banana:
-
-
Re: Pulled an Engine!!
should have taken it through the bottom2001 Camaro 3.8 A4
1991 3000GT VR4
2001 Mitsubishi Eclipse GS
-
Re: Pulled an Engine!!
couldent, we had to roll the car outside to have enough space to work on the engineComment
-
Re: Pulled an Engine!!
why did you pull the block in the first place? i cant remember
also harbor freight tools FTW.. well, the engine lift anyways, their engine stands seem very weakComment
-
Re: Pulled an Engine!!
Looking good. Are you going to rebuild and modify or put in something else? And x2 FTW for the Harbor Freight engine hoist. And cam98maro, I've got 350 from a 79 C3 on a Harbor Freight engine stand that says otherwise.Comment
-
Re: Pulled an Engine!!
Congrats.
New project: Work on re-sizing pictures. They are huge!Comment
-
Re: Pulled an Engine!!
i have a 327 on one of their stands, and the engine sags down at the front, i have to lift the front of the block up to get the little pin in to keep it from rotatingOriginally posted by The Banks View PostComment
-
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...3 days ago -
Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago -
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment