need help asap - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

need help asap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need help asap

    I started the car...shut it down and went to put in the tune...hp tuners said it could not find the vcm....now the car wont run......

    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

  • #2
    Re: need help asap

    Did you check all your fuses?
    If they are all good, unhook the battery for a few minutes and try again.
    sigpic

    Comment


    • #3
      Re: need help asap

      do a write entire instead of a partial write, does that make a difference?
      http://www.bowtiev6.com/

      Comment


      • #4
        Re: need help asap

        no...for some reason the lap top I was using would not read/write the tune...I managed to limp the thing home, used my regular laptop and didnt have a single issue.

        Really weird though because my scanner (not hp tuners) would not read the car either...I tried my dads laptop in my driveway one last time (like the 9th or 10th actual time trying) and nothing...got my laptop...worked like a charm...

        Car runs smooth as butter now...weird problem though

        2002 SOM Z28 Camaro - 12.9 @ 104 mph
        1996 3800 Camaro - 13.43 @ 100.77 mph


        Project Cars | How To Guides | Scratch Repair | Synthetic Oil

        Comment

        Latest Topics

        Collapse

        • LETZRIDE
          New Owner!
          by LETZRIDE
          I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
          3 days ago
        • ssms5411
          Little work today
          by ssms5411
          Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
          2 weeks ago
        • LETZRIDE
          Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
          by LETZRIDE


          Building the Tom Henry RS
          Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
          By: Hib Halverson


          At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
          Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
          02-07-2020, 10:30 PM

        FORUM SPONSORS

        Collapse
        Working...
        X