I blew my head gasket so I'm planning on getting a new one installed. I was wondering though. In my Haynes manual, it tells me to apply sealant if steel gaskets are used. Well, I ordered the head gasket kit from GM parts direct. I don't really know if those are steel or not. I also remember reading on here that sealant shouldn't be used on head gaskets because it will just make the head gasket blow. Any ideas?
Announcement
Collapse
No announcement yet.
Head gaskets. Apply sealant or no?
Collapse
X
-
Re: Head gaskets. Apply sealant or no?
GOD NO!!!!
NO sealant!!!
I made the same mistake and used red RTV, it worked though.
I still had to redo it because i found out it wont last long
The reason I used rtv is because of the Haynes2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!
Comment
-
Re: Head gaskets. Apply sealant or no?
Originally posted by slow6GOD NO!!!!
NO sealant!!!
I made the same mistake and used red RTV, it worked though.
I still had to redo it because i found out it wont last long
The reason I used rtv is because of the Haynes1997 Camaro Y87. Turbo.<br /><a href=\"http://pureoctaneracing.net/\" target=\"_blank\">Pure Octane Racing</a>
Comment
-
Re: Head gaskets. Apply sealant or no?
another reason I used Red RTV is because the Oreilly's clerk JOEY specifically said use RED RTV.
Then when I took it back the dam General Manager said to use the copper spray. The G.M. also said to reuse the dam Torque 2 Yield head bolts! Both of them are dumbasses!2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!
Comment
Latest Topics
Collapse
-
by LETZRIDEI am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...4 days ago
-
by ssms5411Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...2 weeks ago
-
by LETZRIDE
Building the Tom Henry RS
Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
By: Hib Halverson
At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...02-07-2020, 10:30 PM
Comment