Can i take the oil pan off

[94-3.4]

with the motor still in the car? I need to get in there and take a look to see what else is broke.

[Tiago]

you will have to lift the engine up at least a couple of inches, y not just pull the engine anyway? might as well...

[94-3.4]

I don't have any way to lift the motor.

[Ironman24]

I was able to pull the oil pan on my 3.8 without lifting the motor. But I had to pull the tranny out to slide the oil pan out from the back. The oil pickup was the trick part, on the 3.8 it's on the side of the block so you can drop the pan an inch to get a wrench in there and take it off. I'm not sure how similar the setup is on the 3.4 with the oil pickup. Anyone know with a 3.4?

[GordSipko]

If your engine has the Oil Level sensor (the 95 3.4 does), this must be removed to get the pan past the oil pump pickup. The oil level sensor is quite fragile as I discovered.

[94-3.4]

It looks like i am just going to pull the motor. I have it pretty much apart enough that it would be fairly easy to get out. I still have to unbolt the tranny and a couple other things but it is not too bad.