will this cam work ??? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

will this cam work ???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • will this cam work ???

    degree dration @ .050 228int. 238exh.

    degrees advertised 290int 300exh

    degree lob seperation 112

    open/close @ .050 camlift
    int exh
    7 4
    56 2
    lash hot .022int .022exh
    grosslift .460int .480exh

    help
    1998 Jet Black Trans-am M6 T-tops<br />\"Ask, and it shall be given you; seek, and ye shall find: knock and it shall be opened unto you:-Matthew 7:7<br />Old car<br /><a href=\"http://matthew27529.tripod.com/getsome\" target=\"_blank\">http://matthew27529.tripod.com/getsome</a><br />NEW CAR<br /><a href=\"http://garnerebel.tripod.com/\" target=\"_blank\">http://garnerebel.tripod.com/</a>

  • #2
    never mind i have to pass emissions and i can't with this cam [img]graemlins/thumbsdown.gif[/img] [img]graemlins/thumbsdown.gif[/img] [img]graemlins/crybaby.gif[/img]
    1998 Jet Black Trans-am M6 T-tops<br />\"Ask, and it shall be given you; seek, and ye shall find: knock and it shall be opened unto you:-Matthew 7:7<br />Old car<br /><a href=\"http://matthew27529.tripod.com/getsome\" target=\"_blank\">http://matthew27529.tripod.com/getsome</a><br />NEW CAR<br /><a href=\"http://garnerebel.tripod.com/\" target=\"_blank\">http://garnerebel.tripod.com/</a>

    Comment


    • #3
      Yea and that cam is WAYYY to big..

      You'd be making peak power well past your rev limiter.
      Keith - Chicago<br /><a href=\"http://www.hptuners.com\" target=\"_blank\">HP Tuners - PCM Reprogramming</a><br /><a href=\"http://www.dxsoftware.com/magnus/\" target=\"_blank\">97 Firebird V6 to LS1 swap</a><br /><b>V8 9.967@132.78</b> 1.322 60\' NA Heads/Cam<br /><b>V8 10.295@128.48</b> 1.363 60\' NA Cam Only<br /><b>V8 10.987@119.31</b> 1.422 60\' NA Stock Internals<br /><b>V6 13.674@98.22</b> NA<br /><b>V6 12.394@104.91</b> N20 100HP

      Comment


      • #4
        even though the peak hp will be past my rev limiter wont it still make good hp i was told if i run a msd i could burn up the extra fuel and pass emissions??

        any opinions
        1998 Jet Black Trans-am M6 T-tops<br />\"Ask, and it shall be given you; seek, and ye shall find: knock and it shall be opened unto you:-Matthew 7:7<br />Old car<br /><a href=\"http://matthew27529.tripod.com/getsome\" target=\"_blank\">http://matthew27529.tripod.com/getsome</a><br />NEW CAR<br /><a href=\"http://garnerebel.tripod.com/\" target=\"_blank\">http://garnerebel.tripod.com/</a>

        Comment


        • #5
          your bottem end torque would be nonexistant.

          Just because you make peak power higher in the RPM band doesn't mean your entire RPM band has more power. The lower RPM's will actually lose more power.

          You'd be better off with a cam that peaks around 5200-5500 is your rev limiter is 6000.
          Keith - Chicago<br /><a href=\"http://www.hptuners.com\" target=\"_blank\">HP Tuners - PCM Reprogramming</a><br /><a href=\"http://www.dxsoftware.com/magnus/\" target=\"_blank\">97 Firebird V6 to LS1 swap</a><br /><b>V8 9.967@132.78</b> 1.322 60\' NA Heads/Cam<br /><b>V8 10.295@128.48</b> 1.363 60\' NA Cam Only<br /><b>V8 10.987@119.31</b> 1.422 60\' NA Stock Internals<br /><b>V6 13.674@98.22</b> NA<br /><b>V6 12.394@104.91</b> N20 100HP

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X