need a little help - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

need a little help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need a little help

    hey guys got a little problem. my beater(1984 toyota corolla 76k) has a problem. i will drive the car, and then stop at a light and the car will start to buck and then stall out. now this doesn't happen all the time. maybe once a day if that. i changed the spark plugs, wires, rotor, dis. cap and o2 sensor. a few weeks ago. and the problem really slowed down alot. now it's getting bad again. what can i do now to stop this.
    WAWA-A-HOLIC


  • #2
    check fuel filter, IAC motor (if any) and codes
    1978 Formula 461 in progress of being built :rock:
    2013 Ram 1500 Big Horn

    former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
    94 comero 3.4

    Comment


    • #3
      Fuel filter, bingo. Check that [img]smile.gif[/img] I bet its rusted like a sunuva*****. Fuel filters, if you ask me, should be no more than slightly surface rusted..
      Mustangs.. Come to the darkside...<br /><br />The dark side is the path to the shadow of greed. =D

      Comment


      • #4
        I'd put my money on EGR valve. Engines don't like to idle when that sucker bypasses even in the slightest.
        Now Playing: \'99 Pewter Firebird, stock, bone stock, and nothing but stock, so help me God!<br />Comming attractions: K&N Filter, Lid Mod, Intake Bellows Smooth Pipe Mod.<br />I dream about: Forced Induction (TC or SC) or NOX (or both!)

        Comment


        • #5
          i already did the fuel filter. it's a carb engine so the egr will be a b!tch
          WAWA-A-HOLIC

          Comment


          • #6
            Perhaps a Redneck decal would fix it?
            :D .


            Have you checked the timing since you replaced all that stuff?
            Adjusted the carb recently?
            1997 Chevrolet Camaro v6 - 13.8@104MPH
            1997 Dodge Viper GTS

            Comment


            • #7
              i have no idea how. but the redneck decal wouldn't work.... maybe a white trash one. since that is what it looks like right now!
              WAWA-A-HOLIC

              Comment


              • #8
                Originally posted by kristen:
                ..... it's a carb engine .....
                so, when was the last time it was rebuilt? and how old are the vacuum lines under there?
                1978 Formula 461 in progress of being built :rock:
                2013 Ram 1500 Big Horn

                former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
                94 comero 3.4

                Comment


                • #9
                  we checked all the lines and they are fine.
                  WAWA-A-HOLIC

                  Comment


                  • #10
                    i'm now getting really bad gas millage. could that be a result of the egr?
                    WAWA-A-HOLIC

                    Comment


                    • #11
                      My ol ladies protege did the same thing (bucking, bad mileage and all) and it was the fuel filter anda vacuum line where some screw was lost. Idk, but it fixed it for less then 20 bucks [img]smile.gif[/img]
                      97 RS<br />Member Status: F-Body Owner<br />Member Number: 7705<br />Registered: September 13, 2005<br />Posts: 24<br />Email Address: hfoxx123@yahoo.com<br />Location: Minnesota<br />Occupation: Database Administration<br />Homepage: <a href=\"http://none\" target=\"_blank\">http://none</a><br />Car: uh a camaro

                      Comment

                      Latest Topics

                      Collapse

                      • LETZRIDE
                        New Owner!
                        by LETZRIDE
                        I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...
                        4 days ago
                      • ssms5411
                        Little work today
                        by ssms5411
                        Went ahead and moved my starter wire from the back, to the front again since it had no effect on my drain on the battery. Also made me nervous driving...
                        2 weeks ago
                      • LETZRIDE
                        Tom Henry RS Pt 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff
                        by LETZRIDE


                        Building the Tom Henry RS
                        Part 4: Suspension Mods, Tires, Wheels, Headers and other Cool Stuff.
                        By: Hib Halverson


                        At the end of Part Three, we changed the valvetrain of the 3.8-liter V6 in the Tom Henry RS. We installed new, Yella Terra "Ultralite" 1.8:1, aluminum roller rocker arms, Katech valve springs and Katech titanium retainers on our 3800 Series II V6.
                        Ultralites are nearly 25% lighter than the stock 1.6 rockers and 8% lighter than the SLP aluminum...
                        02-07-2020, 10:30 PM

                      FORUM SPONSORS

                      Collapse
                      Working...
                      X