Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well shoot, post up a timeslip then! That's an accomplishment and i think there is some kind of a reward going over of ftv6 to the guy who breaks the street legal record.
meh. It was a couple years ago, and I've moved twice since then. Plus, fullthrottle can blow me. I wouldn't have needed an engine had FlyinGTP been competant enough to correctly torque the lower intake manifold bolts on my previous engine.
Exact same as Magnus' cam setup. It was the cam out of his car. lol. I can't even remember what I ate for lunch last tuesday. Fat chance of me remembering cam specs years later.
meh. It was a couple years ago, and I've moved twice since then. Plus, fullthrottle can blow me. I wouldn't have needed an engine had FlyinGTP been competant enough to correctly torque the lower intake manifold bolts on my previous engine.
You don't say? Figures. Wonder where he got that torque info from?
1995 Pontiac Firebird
2008 Chevrolet Silverado LT Crew Cab 4x4
Spraying had alot more to do with it than the cam. Even James went bottom 12's on a stock cam.
Wes, I think he got the torque specs from the inside of a cereal box. Half were so tight I needed a 2ft breaker bar to get them out, and the other half were not even finger tight.
Exact same as Magnus' cam setup. It was the cam out of his car. lol. I can't even remember what I ate for lunch last tuesday. Fat chance of me remembering cam specs years later.
212/212 .520/.520 112 lsa 108 ic...Comp XE lobes...:D I remembered the specs for ya..lol
2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c
Spraying had alot more to do with it than the cam. Even James went bottom 12's on a stock cam.
Wes, I think he got the torque specs from the inside of a cereal box. Half were so tight I needed a 2ft breaker bar to get them out, and the other half were not even finger tight.
Sounds pretty stupid on his part. Probably didn't even torque them down, just used a ratchet till it was tight. I used some medium grade threadlocker on mine, has enough flex, but I make ABSOLUTELY sure that my torque wrenches are well taken care of. They are always set to their lowest settings when not in use, so I can count on the torque being right.
BTW, I am availiable if you need any help with the little things on the car, just send me an IM. I think I owe you still for the harnass, I feel I shorted you when I got it.
1995 Pontiac Firebird
2008 Chevrolet Silverado LT Crew Cab 4x4
meh. It was a couple years ago, and I've moved twice since then. Plus, fullthrottle can blow me. I wouldn't have needed an engine had FlyinGTP been competant enough to correctly torque the lower intake manifold bolts on my previous engine.
Says the guy who sprayed 175 on a stock bottom end, with the stock intake.. Not a good idea.. Fuel pools in the lower intake and well BOOM!!!.. If nitrous backfire occured when you ran a 175 shot.. The torque specs would be discernable let alone would they matter
2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c
Dual stage, wet and dry. I prefer to add fuel at the injector, but I wasn't going to get enough out of 30's so I had a small wet shot on top of my big dry hit. I never sprayed the car after I got it back from the cam swap. It locked up in less than 8 miles.
Dual stage, wet and dry. I prefer to add fuel at the injector, but I wasn't going to get enough out of 30's so I had a small wet shot on top of my big dry hit. I never sprayed the car after I got it back from the cam swap. It locked up in less than 8 miles.
Wow.. Tough sledding
2000 Firebird. Whisper Lid, True duals, TSP mail order tune, Built Tranny , TCI 2800 stall verter, B&M tranny cooler, Eaton LSD, 3.42 gears. Current best ET. 15.232 89.09 MPH 2.175 60ft on stock 3.42\'s and open diff.<a href=\"http://www.geocities.c
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment